Question about 1999 Plymouth Grand Voyager

1 Answer

1999 voyager heater motor worked on high then not at all

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,674 Answers

Sounds like resistor gone for blower motor. Should be located under hood, passenger side behind strut tower on firewall. Little tight to get in there, remove 2 screws and slide it hard to one side and pull out at opposite end hard.

Posted on Nov 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the heater control valve location in a 1999 Plymouth Voyager 3.0l engine?


Dont Assume anything til u hav a shopmanual that givs engine specs and details. Partstore or librarya

Oct 27, 2015 | 1999 Plymouth Voyager

1 Answer

Heater only works on hight


it's either to switch or the motor,

Jan 24, 2012 | 1999 Plymouth Grand Voyager

1 Answer

Heater only worked on high then quit?


If it only worked on high there could be two problems.First on the passenger side of the firewall,under the hood in the back there is a connector with I think 5 wires.That is the blower resistor.It pulls out from the firewall.remove it and inspect it,thatis probably your issue.Craig

Dec 12, 2011 | 1999 Plymouth Grand Voyager

2 Answers

1999 PLYMOUTH VOYAGER HEATER/AC FAN ONLY WORKS ON HIGH


There should be a seperate fuse for the lower fan speeds and another for high. If you have the owner's manual you will find a fuse diagram in it, if not then try going to napaonline.com and do a search for the fuse box diagram.

Feb 25, 2011 | 1999 Plymouth Voyager

1 Answer

Heater motor will only blow on high speed


sounds like the heater resister is broken as it restricts the power to the heater in order to give you the slower blower speeds

Jan 25, 2011 | 1999 Plymouth Grand Voyager

1 Answer

My 2001 Voyager blower fan only runs on high.


This is 100% the Blower (Fan) Motor Resistor located near the Blower Motor.
This is a very common problem with Chyrsler, Dodge, Plymouth. The key symptom is the Fan only working on High.
This is very easy to access and replace.

Let me know if this helped....

May 11, 2010 | 1999 Chrysler Sebring

2 Answers

1996 plymouth voyager van blower --high only


YOUR BLOWER MOTOR RESISTOR IS BAD OR THE BLOWER MOTOR CONTROL SWITCH COULD BE FAULTY.

Sep 13, 2009 | 1996 Plymouth Voyager

1 Answer

AC Control Switch Only Works on High 2001 Voyager Climate Control


this problem is caused by the blower motor speed control resistor being defective, it is located next to the blower motor.

Aug 04, 2009 | 2001 Chrysler Voyager

2 Answers

Front heater/ac fan motor will not run on my 97 Plymth Voyager


there is a resister on the bottom of the heater core an ac core box replace that first and if that is not it the windings in the motor it self are bad replace motor

Jul 15, 2009 | 1999 Plymouth Grand Voyager

7 Answers

Heater Control Switch Only Works on High


Your problem is probably a part called the heater resistor block or board. When this part burns out you will only have high speed on the fan. On my 1999 voyager it is located on the firewall and it snaps in a hole in the firewall. This is under the hood behind the alternator.
Mine had a multi pin black plug plugged into it. Unplug the plug and
you should be able to pull the block out insert new block and plug plug back in and it should come to life.

Jun 05, 2008 | 2001 Chrysler Voyager

Not finding what you are looking for?
1999 Plymouth Grand Voyager Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...