Question about 2005 Ford Explorer

2 Answers

Battery was dead and tried to start after charging, starter solenoid clicked and engine turn over slowly without starting. Now engine will not turn over. Battery is charged have power to all accessories and systems other than starter will not turn over engine.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Okay,think of it this way,you tried starting,engine turned slowly,no start.....then you charged battery,engine wont turn over(although accessories work)WHY WAS THE BATTERY DEAD TO START WITH.Try a jump start(another battery)if it starts then you know what im going to say.....

Posted on Nov 06, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Sounds like the battery is not holding a deep charge. it may have a cracked cell. load test it. good luck. hope this helped.

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 gmc seirra hybrid 6.0 won't start but all lites and everything works fine. But there's a constant clicking up by fuse box under hood


constant clicking means the solenoid for your starter motor is either:
- Defective (not likely- since the click means it was working momentarily)
- Not getting enough power to stay on (battery is good for light, not for amperage of starter motor)
- Turns itself off due to overload amperage (seized starter motor/engine)

The clicking is commonly just an indicator of a dead battery; the solenoid clicks- connects power to the huge drain of the starter motor- then, as the amperage draw "browns out" the battery, not enough power is left to keep the solenoid on- clicks off. power drain is gone- solenoid clicks back on- (repeat until battery is REALLY too dead to even get the solenoid to click)

Its important to note that interior lights, dashboards, and stereos draw very little power, an are not good indicators of battery charge.

I would recommend getting a jump-start from somebody, before doing anything more intense. After engine is running, maybe bring it to a mechanic to check its battery charging circuit.

Dec 03, 2015 | GMC Cars & Trucks

3 Answers

Car wont turn over and making a humming noise when key is in on position. when i try to start it the car makes a clicking sound.


the alternator isn't charging battery that would account for loss of power and also clicking when try to start , try a jump start if it starts then you know its the battery so with engine running check the alternator charge rate with a voltmeter across the battery terminals anything below 13 volts then check the alternator belt is tight enough , good condition etc , then recheck charge rate if still low fit new alternator

Nov 05, 2014 | 2006 Nissan Altima

2 Answers

Clicks but will not start


sound like dead battery.have vechicle jump start if vechicle cranks problem could be weak battery and corroded battery cables and battery terminals or post.if battery dead have it recharged load tested if battery over 4 or 5 years old battery need replacing make sure have alternator out put test.could be reason battery goes dead either battery very old or alternator not keeping battery charged. if battery good.clicking noise could be faulty starter solenoid either relay. or starter could be bad.

Apr 07, 2013 | 1994 Eagle Talon

3 Answers

Battery is dead and wont start


Make sure the battery is fully charged before trying again. If the battery wont charge get a new one. Once installed use a multimeter to verify that the alternator is charging.

Sep 22, 2012 | 2004 Chevrolet Chevrolet TrailBlazer EXT

4 Answers

Car won't start without being charged and when it sits overnight it wont start. makes a clicking noise when trying to start it


Battery is to weak & not holding charge. If the battery does not have enough power the starter will make a fast clicking sound or you will just hear one click.

Feb 06, 2012 | 2000 Chrysler Cirrus

1 Answer

Car doesnt want to start. all lights come on when in the on position however when I turn it to start nothing happens it dont even try to turn over it just clicks 2002 hyundai xg350


The starting system consists of:
  • starter motor
  • starter switch, part of the ignition switch
  • starter motor solenoid relay switch
  • starter solenoid
  • starter drive
When you turn your key to start your engine, it just clicks, right? If so, more than likely this is due to a bad battery. Even though your battery may appear to be fully charged, it may have a dead cell, or worse. If you get a jump, does the vehicle start? If so, replace your battery.

Possible sources of the problem if the engine does not crank or the relay clicks:
  1. Battery
  2. Starter motor
  3. Starter motor relay
  4. Ignition switch
  5. Damaged fuse
  6. Anti-theft system
  7. Circuitry

Mar 16, 2011 | Hyundai XG350 Cars & Trucks

2 Answers

My gauges work but it wont turn over i dont hear any noise from the starter


Three possibilities I think:
First is weak battery. There may be enough juice to light the gauges but it takes power to turn an engine.

Second, bad solenoid. The solenoid is a relay which closes the high current circuit that delivers the cranking power to the starter motor. If you hear clicking in the engine compartment (not the starter) when you turn the ignition switch on it is probably the solenoid engaging and disengaging. However if the battery is weak it won't turn the starter motor. If the solenoid is clicking look at the battery first. The solenoid could be bad but the clicking indicates it's trying to work and there just may not be enough juice to turn over the engine.

Third possibility is the starter motor itself is dead. You have to answer some questions for yourself. Is this an old,neglected car or one that has been taken care of? I would be looking at battery. Can you jump start it? If yes then weak battery is the likely problem. If the car and battery are relatively new and in good condition you should suspect the charging system, that is, the alternator. Did this happen all of a sudden on a car that was running fine recently or has the car been sitting idle for weeks/months.Eliminate the easy stuff.
Clean battery terminals?
Good battery connections and ground?
Try jump start - if yes then follow up battery/charging system. If no start then try to hear for solenoid clicking. If jump start does nothing -figure the solenoid first. If it sounds like solenoid is kicking in but engine does not turn then the starter is looking a little guilty. Jump starting will answer a lot of questions. If the car is really dead then the car that is jumping may have to be connected and revved up a couple minutes to juice up the dead battery enough to turn the starter over. If it turns over a little during the jump start but just barely then you should figure your battery is bad.

Sep 04, 2009 | 1992 Chevrolet S-10

2 Answers

1999 Jeep Grand Cherokee...clicking not starting


your battery is dead from cranking it so much. Charge the battery and then it should start

Jul 07, 2009 | 1999 Jeep Grand Cherokee

2 Answers

95 F150 wont crank


the starter should be replaced. The solenoid is kikcing the pinion out but there is no contact being made to turn the starter motor. I have the exact same truck and before i changed the starter used the old starter tap trick. Tap the starter casing with a hammer and it should start turning again. hope this was helpful for you. Good luck.

Sep 16, 2008 | 1995 Ford F150 Styleside Regular Cab

Not finding what you are looking for?
2005 Ford Explorer Logo

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...