Question about 1997 Chevrolet Camaro

2 Answers

I am still havun problems with my 1997 camaro rs, the back turnsignals work but the front doesn't i was asked to check the elays but that is not the problem if there are any other suggestions they would be gladly appreciated

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Check flasher under radio

Posted on Aug 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

There is a big conector coming from the steering colum, and is goin to the turn signal switch turn the signal on and test that you have a blinking power, at two cables then turn the other side on and do the same, if you have not power on two cables per side then you need a new turn signal switch, just make sure not to test any thing with yellow color because that's going to the air bag and you might deploy the air bag.

Posted on Jun 15, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fireing order on a 1997 camaro rs i.e. which plug goes to which coil

. Fireing order on a 1997 camaro if it is the 3.8 lt engine, this is the order as googled images

Dec 21, 2014 | 1997 Chevrolet Chevrolet Camaro

2 Answers

Started Lossing of power replaced the fuel filter thinking that was it ran fine for about an hour then loss power again and finally stopped running all together and will not start back up in a 97 cameo rs

you could have a bad fuel pump.have the pressure and fuel volume to make sure they are with in specs.when the car doesn`t run check to see if yhou have spark if so then its more than likely fuel problem if there is no spark then you could have ignition problems and if you have the computer put on a scanner there may be a code in it and maybe able to see what the computer sees and help diagnoise the problem.

Oct 22, 2011 | 1997 Chevrolet Camaro

1 Answer

Where is the starter located on a 1997 chevy camaro rs


Mar 07, 2011 | Chevrolet Camaro Cars & Trucks

1 Answer

I have to replace multi-function turnsignal lever.

After not getting an answer from anyone on this site, I went back out to car, and figured it out by myself. Amazingly, it was rather simple. After unhooking wire connector from multi-function lever, all that needed to be done was pull lever out of column. It took a little twisting back and forth, and a firm pull on lever. There is an 'e-clip' that holds lever inside of hole in column, plus a slot on hole, and a '***' on lever. Had to twist back and forth slightly while pulling firmly. Unfortunately after trying a different lever, I realized that the problem is the turnsignal switch, a whole new can of worms to contend with.

Oct 29, 2009 | 1990 Chevrolet Camaro

1 Answer

Fuel gauge on my 88 camaro rs is pegged above full how do i fix

lol, i had the same problem on same car 2 months ago. i disconnected the gauge cluster and then moved it down manually and the plugged it back in. seems to work fine for me

Sep 22, 2009 | Cars & Trucks

1 Answer

My 1992 chevy camaro rs fan doesn't work

Hook fan up to Batt power. if it work check fuses and relay. if no problem its a wiring problem. If fan is inop replace it

Sep 21, 2009 | 1992 Chevrolet Camaro

1 Answer

My hazards in my 1997 camaro rs work, but the back and front turn signals dont. The lights for the signals dont work in the dash either, just the lights for the hazards

check the signal flasher ( little silver or colored can in fuse panel or under dash. 4 ways have 1 flasher and the signals have a seperate flasher. Put hazards on to hear click, to determine which flasher is which. Hope this helps

Apr 13, 2009 | 1997 Chevrolet Camaro

1 Answer

1997 camaro front turn signal problem

probley a lose ground, id check all the wires and make sure the lights are tight in there socketts.

Mar 23, 2009 | 1997 Chevrolet Camaro

1 Answer

92 RS Camaro, Replaced battery and now car has no power?

are your battery post bolts clean and tight, my 89 rs ran fine untill i decided i wanted shiny new battery bolts, when i put them in and tightened them down my car had no power at all, i checked how tight they were, and they were TIGHT so i wiggled the black cable and re tightened it and bam my lights turned on, tryied starting it, and it started, sometimes you just gotta make sure the connection is really good, not just how tight it is, also check your ground wires, there are a few but the main 2 are located at the front pass side next to the batt, and on the back firewall going from the bottom pass head to the firewall, hope that helps, if not comment back

Mar 17, 2009 | 1992 Chevrolet Camaro

Not finding what you are looking for?
1997 Chevrolet Camaro Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides