Question about Chevrolet C1500

1 Answer

How to replace front rotors on 1997 Chevy 1500, 2 WD, 6 cylinder.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

First jack up the front end of the truck on both sides and put jack stands under it. Then remove the tires then the brake calipers. Now would be a good time to replace the brake pads also. Some rotors wil then just slide off if you have the kind with the bearing as part of the rotor assembly then you will need to first remove the cotter pin and the dust sleeve then there will be a big nut to undo. now you can slide off the rotor with the bearing be sure to repack the bearings with new grease before installing the new rotors. You will also need to compress the caliper pistons you can do this by opening up your brake fluid lid on the master cylinder and either using big channel locks or whatever is easiest for you.

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install front gasket for transmission inside front of transmission on 1997 chevy pu 1500 4.3 6 cylinder


Lilia,
You have a front and rear seal on a transmission, if you are speaking of the front seal,the transmission will have to be removed to get to it.
If you are speaking of a different one, please repost and I will try to help you.

Thanks, Robert

May 04, 2017 | Chevrolet 1500 Cars & Trucks

2 Answers

I have a1997 Chevy 1500 and I am wondering were is the flasher relay at.


Most cars the flasher relays are up under the dash not far from the steering column. I had several makes of cars and they all were up there.

Jan 10, 2016 | Cars & Trucks

1 Answer

Firing order 1997 chevy tahou 1500 5700 motor from to dis


firing order 1-8-4-3-6-5-7-2

distributor location
6 5
4 3
2 7
8 1

engine cylinders
8 7
6 5
4 3
2 1
front of vehicle

Dec 21, 2014 | 1997 Chevrolet Tahoe

1 Answer

I have a 1995 dodge 1500 3.9L V6 truck,its back firing need spark plug wiring diagram,and firing order.


3.9L V6 engine firing order is 1-6-5-4-3-2, cylinders on the pass side front to back are 2-4-6, cylinders on the driver side front to back are 1-3-5.


Aug 31, 2011 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Diagram of fireing oder of 4.3 V6 1996 chevy


Posted by original Asker under 2000 GMC New Sierra 1500 for a 1996 Chevy 4.3L V6

For the 1996 Chevy 4.3L V6:

Firing Order
:
1-6-5-4-3-2

Cylinders:
........(back).......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor Connections:
...........(back)
Coil-> o
6-----> o.......o <-----5
4-----> o.......o <-----1
2-----> o.......o <-----3
...........(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Jun 20, 2010 | 2000 GMC New Sierra 1500

2 Answers

Where is # 1 on dist capon 1982 corvette crossfire fi 350


STANDING IN FRONT OF CAR 1 ON DISTRIBUTOR CAP IS ABOUT 5 OCLOCK POSITION.

Jan 17, 2010 | 1981 Chevrolet Corvette

1 Answer

What is the correct firing order for a chevy 1989 5.7 engine on the distrbutor cap


1989 Chevrolet K 1500 P/U 4WD
5.7 liter V-8 VIN "K"

Firing order is 1-8-4-3-6-5-4-2
Distributor rotates clock wise and #1 is at the 5 O'clock position "post by the # 7 cylinder.

Cylinder # passenger side front to back 2-4-6-8
Cylinder # dirver side front to back 1-3-5-7

Dec 09, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...