Question about 2004 Honda Accord
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1999 Honda Accord Coupe
See an example
DISASSEMBLY 1. Remove the suction pipe and the O-ring from the oil pump.
2. Remove the rear cover with the gasket and pins. 3. Remove the cam ring. 4. Remove the rotor and vanes. 5. Remove the front side plate.
6. Remove the inner and outer O-ring. 7. Remove the spring. When assembling, use a new gasket and O-ring.
8. Remove the pulley nut with the spring washer. 9. Pull off the pulley and the woodruff key. 10. Remove the snap ring using snap ring pliers. 11. Drive out the pulley shaft with the bearing. If necessary, use plastic hammer
Posted on May 30, 2008
Just the very top ring of the transmission dipstick is visible with the air filter housing lifted up. Removing the upper air filter housing and the rubber ducting for the intake will allow enough room for a transmission funnel to be used.
Posted on Aug 27, 2009
Hold down the reset button on the dash panel (normally the same one you use to reset the trip odometer), turn on the key without starting the engne. Continue holding the button; The service light should go out within 10-15 seconds.
Posted on Jul 22, 2010
Tips for a great answer:
Jan 11, 2016 | 2007 Honda Accord Coupe
Jul 14, 2014 | 2012 Honda Accord LX-S Coupe 2.4L 4-cyl....
Jan 22, 2012 | 2004 Honda Accord Coupe
try to go to this link you can download the service manual here.
Dec 22, 2010 | 2004 Honda Accord
May 20, 2010 | 2004 Honda Accord
Feb 11, 2010 | 2004 Honda Accord
Aug 13, 2009 | 1999 Honda Accord
Apr 05, 2009 | 2004 Honda Accord
36 people viewed this question
Usually answered in minutes!