Question about 1994 Toyota Camry

1 Answer

When i turn my steering to full extend either to right hand side or left, like turning my car in u turn...some noise is coming ..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

The noise, like grinding or squeeling, is the power steering pump clutch,it is normal and nothing to worry about,(actually, its the fluid,bypass valve,that makes the noise)

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Steering sticking and noise from front end


it could be a pump fault. have some one at the front of the car watching the pump. some one sit in the drivers seat and parked up start engine and wiggle the steering wheel left and right see how the pump is acting. engine revs should drop and rise when doing this if no drop etc then the pump fins inside are warn. If this is all ok jack the front off the ground and put on stands, turn the steering to full on each side at a time and check the steering rack joints and balls and the condition of the rubbers. look for leaks in the line wile you under there.

May 13, 2013 | 2000 Toyota ECHO

2 Answers

My 1998 hyundai excel glx has a clicking sound front left wheel when turning


that would most likely be your drive axel when they go bad they click when you turn the steering wheel

Feb 04, 2013 | Cars & Trucks

1 Answer

2005 F-150 sounds like front wheel bearing is bad. turn to the left and sound is bad. turn to the right and no noise


Looks like it's time for a right wheel bearing, or however many there are in the hub. I'm assuming you do not have a 4 wheel drive. Remember, if it makes noise when turning left, you are "loading" the right wheel bearing. ( Shifting more weight to the side inside your turn). Think this way. When turning left at a higher speed, the left tire might even come up off the ground! That puts all the weight on the right. If you've 4 wheel drive, could also be c.v. joints, or universal joints.

Jan 04, 2013 | 2005 Ford F-150

1 Answer

When making some left hand turns steering pulls to the left then you hear a clunk on the right side and steering is normal


Lift the front of the car and remove the front wheels. Check all rubber bushings and linkages. Compare each side with each other. Check the steering control arms and the ball joints for any play. Check the rack is securely mounted. Swing the steering from full lock to left, inspect everything and then full lock to the right with full inspection. Check your power steering for any leaks etc.

Sep 09, 2010 | 1994 Dodge Stealth

3 Answers

Hi, I have a Ssangyong 2007 Rexton 2 and since I bought it from new it has made a noise that can only be described as a clunk when I go around round abouts or turn right on sharp bens or turns; the...


you may go to ssangyong, mine has the same, and they say that the 2h 4x4 shift, wants to enter in function, or wants to work, they tight a Nut that is in the front left wheel near de suspension and the noise has gone... Sorry for my english...

Feb 26, 2010 | Mercedes-Benz ML320 Cars & Trucks

1 Answer

Cv joint question


Stationary lock to lock turning, will not damage the CV joints, they are designed to turn in this manner, to test a CV joint to see if it has damage, go to an empty parking lot, stop the car, turn the steering wheel full left, accelerate kinda hard, do you hear a clicking or clunking noise? repeat in reverse and on the right hand side. Any noises and your CV joints may be worn, also inspect the CV boots for tears and leakage by turning full left and looking at the boot, then full right. Hope this helps, let me know

Jan 23, 2010 | 2008 Ford Fusion

1 Answer

Cracking noise heard/felt when turn to the left


Have you determined where the noise is coming from? I have heard noises like you describe when a Constant Velocity joint has gone bad in a front wheel drive car. You need to determine which side it's coming from left or right and if it is coming from a worn CV joint your best fix is to have the axle replaced and have the other one checked to be sure it's not going to fail shortly after you replace the one that is bad.

Aug 18, 2009 | 2003 BMW 325

1 Answer

Car makes a whining noise when turning left or right.


hi,if you turn the steering wheel in pull position,left or right it's normal to have whining noise,the system is sefl-bleeding if there is air ,ty

Mar 26, 2009 | 1999 Mercedes-Benz Mercedes Benz Sl Class

1 Answer

2003 Dodge Caravan Front end clunk.


Had similar problem with 2003 Dodge GC. Replaced the parts you mention + rack & pinion, then to fix the now noticable whining noise, replaced power steering pump and pulley. Fortunately was under an extended warrentee at 46k miles.

Jul 06, 2008 | 2003 Dodge Caravan

Not finding what you are looking for?
1994 Toyota Camry Logo

442 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...