Question about 1997 Chevrolet K1500

1 Answer

The motor cranks but have no spark. have changed the coil and the moudaul

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 975 Answers

This may sound odd,but ,I'm betting in the ign. rotor. They have a habit of striking an arc right thru the rotor to the dist. shaft. Really hard to see tho,just replace it. Also while doing that ,make sure the bushing on the top of the shaft is ok,if you can move side to side ,it's bad.(makes the trigger wheel hit the pickup)

Posted on Nov 06, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

1995 ford ranger onlu sparking to 3 cylinders

The coils are fired by the ECM, check all the wires to the ECM from the coils and make sure the signal is getting through and you don't have a wiring issue at the engine firewall connector on the driver side firewall.

Jun 05, 2016 | 1995 Ford Ranger Supercab

1 Answer

Cranks no spark from coil packs had ignition module checked .its ok changed crank and cam sensors still no spark?

Mate i had the same problem with my car, turned out to be a loose wire in the coil harness.... Pull a spark plug out and plug it back into the spark plug lead, then earth it to the body, Get somebody to turn the motor over whilst you move the coil harness around and see it you can get a spark then, Best of luck.....

Mar 11, 2016 | 1998 Buick LeSabre

1 Answer

Hi im cobus my 1300ford bantam rocam motor cranks up but does not want to start there is no spark so i already changed the coil pack

If it's got a crank sensor I'd be starting there as if the crank sensor not working then no spark. Test the wires etc

Aug 25, 2015 | Ford Cars & Trucks

1 Answer

2000 ford taurus crank sensor wiring diagram

follow this link and take your pick of many diagrams for the crank sensor.

Apr 05, 2013 | 2000 Ford Taurus

1 Answer

Motor cranks but will not start

now you must check for fuel delivery. find the shrader valve remove cap push the center as if letting air out of a tire, if there is a sudden burst of fuel then fuel pump is good but if not then check for electricl supply back at the fuel tank,before replacing the fuel pump.

Jan 10, 2010 | 2003 Chevrolet S-10

2 Answers

OK 1997 gmc sierra 5.7liter 4x4 replaced coil and

Doesnt this engine use a crank position sensor? mounted on timing chain cover.I would check that first

Oct 17, 2009 | 1997 GMC Sierra

2 Answers

2003 pt cruiser sensors

check the battery and make sure it has a fully charge,also check to make sure the start motor pinion is not jammed in the flywheel, and check the coil pack to make sure have spark.also check the crank sensor

Feb 14, 2009 | 2003 Chrysler PT Cruiser

1 Answer

1992 pontiac grand prix cranks but will not start

there is a module that the coil pacs plug into, it may be bad or have a bad connection

Nov 21, 2008 | 1992 Pontiac Grand Prix

2 Answers


try seeing if the coil works here is how to see take a spark plug out and leave the wire connected place it on a metal part of the motor crank it over and have someone watch closely and see if the plugs spark on the metal if they don't then it needs a coil and/or coil wire replace just the coil wire first since that is the least expensive option if that does not solve it then change out the coil and dont hold or touch the coil wire when turning it over cause if it works it hurts like heck

Oct 06, 2008 | 2004 Chrysler Sebring

Not finding what you are looking for?
1997 Chevrolet K1500 Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides