Question about Dodge Dakota

1 Answer

How do you change a blinker lite bulb on a 97 dodge dokota do i need to take the whole lite assembly out.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

On most newer cars thats the easiest way to do it. It's not that hard should be just a few bolts.

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My right rear blinker went out so my husband changed the bulb but after doing so the whole light does not work. what could this be?


There seems to be a common problem on a lot of Jeeps with the rear tail light sockets or the wiring right at them. You would need to pull the whole assembly out and apart. See if you can spot a problem with the sockets. It would help to have a voltmeter or test light to keep checking for power at the sockets as you wiggle wires and bulb sockets. If you can't find the problem, consider replacing the whole assembly with new or used.

Jan 05, 2013 | 2000 Jeep Grand Cherokee

1 Answer

Blinkers on my 97 dodge caravan keep turning on and off really fast when car is on about every minute our so need some help wonder id its a dirrect short our bad relay


it could be as simple as a filament in one of the bulbs is arching to ground, first check all the bulbs, if they check out ok,, check the flasher unit for the blinkers

Aug 28, 2011 | 1997 Dodge Caravan

2 Answers

2008 ford f250: rear passenger brake,tail and blinker not working. the front blinker and side marker light on mirror works. dash blinker is blinking very fast


could be the tail lite housing. or the ground on the frame rail back near that location. remove the assembly till its hanging by its wires and remove the bulb. using a test lite probe the socket with the flasher on see if it blinks. if not go down under the rear of the truck and unplug the connector for both tail lites and do the same probe each connector on the harness that goes forward till your test lite starts to blink if it does there then the tail lite assembly is bad if not then repost and ill lead you further

Jan 20, 2011 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Front right blinker wont work 97 dodge ram


If it's only the front right one ( the rear right one is working), try changing the bulb it should be fine.

Mar 07, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Change front passanger blinker


Open the hood and look for a small screw or bolt holding the signal light assembly on by the fender.
Remove this and pull just the signal light assembly straight forward.
Not the whole headlight assembly.
Twist and turn the bulb socket to remove the light from the rear of the light assembly.
Check the # and color of your bulb and get a replacement.
Push in and turn to remove the bulb.

Aug 12, 2009 | 1998 Chevrolet Cavalier

2 Answers

How do i get to the blinker bulb on the 97 olds 88ls in the fron?


To change the blinker or headlight bulb on an 1997 Oldsmobile 88: Open the hood, remove the plastic cover thing so that you can see the housing for the light. On the back side of the housing there are three clips, remove those (I was able to remove them with just my fingers). Once the clips are removed the whole headlight slides out the front of the car. Now you can easily replace any of the blown bulbs.

Jul 26, 2009 | 1997 Oldsmobile 88

1 Answer

2005 Drivers side blinker bulb replacement?


There are 3 screws and a push-pin holding the headlamp assembly in, 2 behind the hood and one at the bottom outside corner. Remove these and pull assembly out to replace lamp

Jun 06, 2009 | 2005 Dodge Ram 1500

1 Answer

Need to find out how to replace blinker light on 97 Dodge Ram


Put your tailgate down and take the screws off on the inside of the taillight. The screws are Torx screws, so you will need Torx head screw driver. Then just give it a tug and the cover will pop right off. You will be able to change out the bulb.

Jan 10, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Wiring problem left blinker does not work properly


bad ground ..trace from bulb area back to fuse block with flashers...wire is shorting to ground or ground is loose.. good luck... also... my 05 ram had wrong sized gaskets around bulbs in back causing bulbs to not last til i discovered it not sealing out the elements and replaced

Jan 07, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Slow to shift out of first gear 2000 dodge dokota


YOUR IN TROUBLE. Had my tranny changed $1600. needs to have a scanner hooked up to tranny. if slipping don't bother having it serviced it's a $100 scam. once it's bad it's bad !!!!

Jan 07, 2009 | 2000 Dodge Dakota Quad Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...