Question about 1995 Isuzu Rodeo

1 Answer

I have a 1995 rodeo I put an ez 350 motor into the rodeo and now im trying to find the positive wire to go to the altnator

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Isuzu Master
  • 975 Answers

Talking about the big terminal?If so ,right to the battery. Alt shops can cheaply replace the internal regulator so the alt. is 1 wire,self energizing. nice and neat also.

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok I have a 1995 ford aspire im trying to figure out how to replace the oil pump


Disconnect the motor mounts and jack the engine to remove the oil pan. Remove the oil pan, replace the oil pump you'll find at the end of a pick up tube, replace the pump and put the pick up tube back on the new pump making sure it's in the same low position it was when removed, replace the oil pan gasket and put the oil pan back on, lower the engine and put the motor mount bolts back in. Put in the proper amount of oil and go.

Nov 13, 2014 | 1995 Ford Aspire

1 Answer

1995 Isuzu rodeo flasher wiring I HAD 5 WIRES


they sold you the wrong one take it back

Sep 01, 2013 | 1992 Isuzu Rodeo

2 Answers

2004 Rodeo, 103,000 miles. no oil leaks so I guess its burning oil. Oil is maybe a qt. low after 1000 since change. Engine still sounds fine but I don't know what a new engine sounds like since I bought...


if you are using a quart of oil every 1000miles,that is NORMAL FOR A MODERN ENGINE.thats why they last so much longer than the old technology.you could try 20/50 oil when you next change as that will help.but worry when it gets to pint every 350 miles.

Oct 07, 2010 | 2004 Isuzu Rodeo

1 Answer

1999 Rodeo,, Isuzu, starter motor and solenoid


Follow positive wire to starter that has the solenid on it.

May 15, 2010 | 1999 Isuzu Rodeo

1 Answer

1996 rodeo 4x4 transmission wire diagram changing transmission from a standard to an auto trans but need to wire a five wire plug at lower drivers side of transmission as it dose not have one in the truck...


You are going to need to purchase the computer that came with the transmission you are putting into the vehicle. A manual transmission computer is not programmed to monitor the same stuff as an automatic transmission. It would be the equivalent of using microsoft word the fix a digital photograph. The program is just not up to the job... I would just buy the whole wiring harness and computer. Then you know it will work. Good luck.

Nov 10, 2009 | 1995 Isuzu Rodeo

1 Answer

I HAVE A 1999 ez go cart and we smelled burning


Look under the cart and make sure the wires to the motor are good.

Oct 01, 2009 | 1995 Volkswagen Golf

1 Answer

Hi all, im putting a 1995 3100 sfi motor out of a


no your on the rite track worst case you will have a engine light on no big deal

Jul 02, 2009 | 1992 Pontiac Grand Prix

1 Answer

SENDING UNIT ???????


most of fuel pumps were in tank, wire corrodes is harness under right front seat floor pan to tank
if fuel pump buzz is heard and car runs and when it doesnt run you cant hear the fuel pump try
turn ignition off wait 10 seconds
turn ignition to on position to (prime or hear pump buzz)
no buzz fuel pump not working check fuel pump relay(swap with another) and try again?
you could use test light to pump wiring and make sure your getting power to pump on this prime test no power relay or wiring problem.
power at pump, but no buzz fuel pump faulty

Jul 01, 2009 | 1997 Isuzu Rodeo

1 Answer

3.1l motor swap


if it is the same motor going in that came out ,it would fit and hook up but if you are changing from one size to another, you will have to change the wiring harness, hope this helps you, thanks robert b.

Jun 27, 2009 | 1995 Chevrolet Beretta

1 Answer

Blower motor


check the charging system,also check that the ground wire to the engineis in good shape test with ohm meter should read zero, also check grond strap the the body itself

Apr 15, 2009 | 1995 Isuzu Rodeo

Not finding what you are looking for?
1995 Isuzu Rodeo Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...