Question about 2000 Chevrolet Silverado

1 Answer

2000 silerado sometimes brake pedel goes to floor on low speed stops

Posted by on

  • Frank Ferree Nov 06, 2010

    Hello, does the brake pedal chatter also?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

Brake pedal shouldn't go to floor for any reason. Check brake fluid level. If high, then there is a problem with the master cylinder.

If the fluid is low, add until the proper level and check for leaks in the brake lines.

Is there an ABS light on?

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air sound on break pedel


you have a leaky brake booster from the sounds of it

Nov 05, 2013 | 1985 Oldsmobile Delta 88

1 Answer

Brake trouble shooting


First off make sure you have brake fluid in your reservoir. Secondly if brake fluid is at the full line. I would try bleeding the brakes. This takes two people. On each cylinder there is a bleeder valve. Start with the drivers front with the engine off have somebody pump the brakes 3 or 4 times then hold it to the floor. open the bleeder valve and the break will go to the floor shut the brake bleeder valve. And repeat 2 more times. " MAKE SURE YOU CAN CHECK YOUR BRAKE FLUID AT EACHthe STEP AND REFILL RESERVOIR AS NEEDED".Then move to the next 3 until complete. If this does not fix your problem most likely you have a bad master cylinder. Good luck.

Aug 21, 2013 | Oldsmobile Cars & Trucks

3 Answers

Are there vacuum hose on the brakes hydraulic system?


NO. the vacuum is used to make the brake pedal easy to push, power brakes. the pedal would be hard without vacuum, that is why the pedal gets hard with the key off and engine not running. the problem you are having is more of a hydraulic problem.
Have the brakes checked asap. the brake system may have a leak causing the pedal to go low. check the fluid level and if it is low or empty then there is a problem, could be a rotted brake line leaking or a wheel cylinder leaking.

Dec 07, 2012 | 1997 Ford Probe

1 Answer

Kia Gear shifter lock


If its a floor shifter there is a plunger under the floor shifter cover. Do u hear a click when u step on the brake pedel? That release the plunger to let u shift the car into gear.

Jun 12, 2012 | 2000 Kia Sephia

1 Answer

Wwith engin running brake pedel goes to the floor


your have air in your lines and brake fluid may be very low..

Jan 23, 2011 | 1994 Ford F350 Crew Cab

1 Answer

Replaced rear breaks, 2007 spectra, breal pedel is solf, goes to the floor. how do I firm up break pedel, never broke any lines.


You have to check that rear brake cylinders doe's not leak fluid. Check your master fluid reservoir when you pump the brakes.
You have to bleed air from the system, and check the vacuum hose at the master brake cylinder.

Feb 21, 2010 | Kia Spectra Cars & Trucks

1 Answer

Break Fluid Leaking, empties every three days


You should be able to look around each tire and see where it is coming from, let me know if any of them have brake fluid on them, if so it is a brake cylinder leaking, if the leak is somewhere else than I may can help you with that, oh and when you do find the problem I can probably save you some money on the repairs.

Dec 19, 2008 | 2000 Ford Windstar

1 Answer

Brake pedel goes to the floor


pump the pedal until it goes hard this is common when you push it back all the way just needs a few pumps to get it to extend back to the pads making contact with the rotor, is there any fluid leaking anywhere? is there brake fluid in reservoir?

Nov 27, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

382 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...