Question about Lexus ES 300

1 Answer

Hai have 1998 lexus es300 and car remote dosent work sometimes properly.. i cant lock or unlock my car and can't able to open the trunk.. via remote please help thanx..

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Remote control needs new battery, or the terminals for it cleaned

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 lexus es300 and it leaks from the sunroof switch and the front footwell by the trunk release lever can you help me figure this out? thanx


the drain tubes are stopped up open sun roof and clean out drains if still dont work replace drain tubes.

Aug 05, 2012 | 1998 Lexus ES 300

1 Answer

Lexus ES300 door auto lock and unlock does not work


i have a 1997 lexus es300 having problems with unlocking the doors and the trunk with the keyless remote the doors will lock with the keyless remote

Apr 09, 2012 | 2000 Lexus ES 300

1 Answer

Hi,i can't open the trunk of my lexus es300,it doesn't have a remote key when i bought it and the trunk button doesn't ,the over-ride switch in the glove box doesn't work as well,what should i do?thanks


Hi, W/D here.
I'm not really familiar with your car, but I thought that I should offer this up as a Good Samaritan....
If your rear seat(s) will flip down, do so and open the trunk from the inside. Then determine why the over ride switch isn't working. The trunk button should be worked manually when you get the trunk open. Lubricate the lock and locking mechanisms with graphite, and not oil. You can get graphite at Lowe's, H/Depot or similar, in the lock dept. You can also get it at craft supply stores (Hobby Lobby). They sell it there for the Cub Scouts "Pinewood Derby" race cars.
Hope that this helped a little, --W/D--

Jan 30, 2011 | 2002 Lexus ES 300

1 Answer

Doors won't lock with remote on my 2002 Lexus GS 300.


are you sure the battery is good in the remote? if so try putting the key in the driver door lock and locking and unlocking the doors three times in a row. if this dosent work i suggest taking it to an experienced lexus shop.

Oct 06, 2009 | 2002 Lexus Gs 300

1 Answer

Lexus es300 1994 Dome light issue!


yes there is a blown fuse. look under the left side of dash and also check the fuses under the hood.

Jun 13, 2009 | 1998 Lexus ES 300

1 Answer

2000 Lexus ES300 trunk lid does not fit right on 2001 Lexus ES300


Hi, try loosening the catch on the trunk lid but do not remove it and the lock mechanism, close the trunk lid but not fully, then pull the backseats down and climb into the trunk. Adjust the lock and latch until they meet up and lock together ( This will take some time and patience is essential). Fasten the Catch and Lock back up. Then retry opening and closing, if it still doesnt fit just do the same again, just needs a bit of adjustment.

hope this helps. jonno

Apr 21, 2009 | 2001 Lexus ES 300

3 Answers

The Lexus car remote key control model ES300


try this:

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (DO NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.

Mar 23, 2009 | 1997 Lexus ES 300

2 Answers

2002 Lexus ES300 'input memorized data'?


More often than not, the long "beeeeeeeeeep" can be traced to a door that is not closed properly, or a dome light switch for a door that is not working properly.

Sep 12, 2008 | 2002 Lexus ES 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...