Question about 1993 Saturn SW1

1 Answer

Where is the flasher relay on a 1995 Saturn SW1? Don't see it in the instrument panel fuse box in the console.

Posted by on

  • calvin_d_war Nov 06, 2010

    Any other place it could be?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saturn Master
  • 17,970 Answers

For 1995 Saturn SW1 1.9L MFI SOHC 4cyl the Flasher is located: Front seating area, center, under dash, front of console, mounted in junction block.

Good luck.

Posted on Nov 06, 2010

  • calvin_d_war Nov 06, 2010

    That sounds like the fuse box behind the access panel on the passender side of the console that I've been looking in. I don't see the flasher relay there, Nothing there looks like the replacement relay I have.

  • calvin_d_war Jul 29, 2012

    I found it. On the driver's side, pop off panel in the center console under the dash. Not on passenger side in fuse box. Flasher is behind a brace and a bit tricky to get to but you can do it. There's a retaining clip you have to free up before the flasher will come out.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is turn signal fuse for 2005 Chevrolet Equinox?


Instrument panel fuse box,-- The instrument panel fuse block is located on the
passenger's side of the instrument panel. Turn and hazzards are in this fuse box. If no turn signals, it may be a bad flasher unit or relay. Good-Day! The relays are in under hood fuse box.

Aug 09, 2014 | 2005 Chevrolet Equinox

2 Answers

Where is flasher relay on 1995 Taurus?


An electronic combination turn signal and emergency warning flasher is attached to the lower left instrument panel reinforcement above the fuse panel.
The turn signal unit is located on the LH side of the instrument panel. The combination turn signal and hazard flasher can be removed by pressing the plastic retaining clip and pulling straight rearward. One phillips® head or regular screw has to be removed from the retaining bracket. It's square not round !

Oct 24, 2013 | 1995 Ford Taurus

1 Answer

Hi, i got a Saturn LS 2 1998, and i need to change the electronic flasher. i would like to know its location. I've been told it might in the dash board area, I don't know where. Please...


Hope this helps!


The turn signal flasher is located in the IPJB. Check the label on the back of the trim panel for the exact location on your vehicle.

To replace the flasher, simply grasp and pull it straight out. Align the contacts on the replacement flasher with its mounting position in the IPJB, then push it in place.



Instrument Panel Junction Block (IPJB)

  1. Remove the lower right trim panel from the instrument panel center column. Separate the Velcro™ fastener at the bottom of the trim panel and carefully unsnap the top corners of the panel from the fasteners.
  2. Remove the applicable fuse or relay from the IPJB, based on the identification label located on the back of the trim panel. A plastic puller is also located on the trim panel to ease fuse removal.
  3. Installation is the reverse of removal
// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 33; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]>

May 12, 2011 | Saturn SL2 Cars & Trucks

2 Answers

2001 2 series saturn.....both turn indicators will not work...changed the fuses still dont work


if both do not work I'd check the flasher unit first or look for a blown fuse (by the passenger side left knee, behind the cover on the console.) The flasher unit is behind the bolster cover above the driver's knees.

Mar 03, 2011 | Saturn S-Series Cars & Trucks

2 Answers

Where do i find the flasher for the indicator? the left light wont come on even thogh we bought a new bulb


Flashers and Relays REPLACEMENT Pickups The hazard warning flasher, on the pickup, is located to the left of the steering column, beneath the instrument panel, and is secured by a clamp and one screw. To remove it, simply unplug the electrical connector, loosen the screw, and slide the flasher out of the clamp. The turn signal flasher is located to the right of the steering column, beneath the instrument panel, and is secured in the same way as the hazard flasher. The turn the signal relay is located to the immediate right of the hazard flasher, and is secured by two screws. To remove it, unplug the electrical connector and remove the screws. MPV The relays and flashers are located under the dash, near the fusebox. Navajo Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel. prev.gif next.gif

Jul 15, 2010 | 1992 Mazda B-Series

1 Answer

Need to change flasher relay in 1997 Mercury Grand marquis . where is it?


From the 1997 Mercury Grand Marquis 4.6L SFI 8cyl repair manual, the Flasher is located behind left side of instrument panel. The turn signal and emergency flashers are attached to the interior fuse panel. They are replaced in the same manner as the fuses and circuit breakers.

5f9d86d.jpg

Fig. 6: 1995-97 models interior fuse box locations (click for zoom)

Hope helps (remember rated this).

Jul 13, 2010 | 1997 Mercury Grand Marquis

1 Answer

The hazard lights on my 1993 subaru loyale are not


Both the turn signal and hazard warning flashers are mounted on the fuse panel.

REPLACEMENT
To remove a relay, simple pull the relay out. When installing a relay, make sure the terminals on the relay line up with the terminals in the fuse panel.
Most of the replaceable fuses for the electrical system are located on the fuse panel under the instrument panel, to the left of the steering column. In addition to the plastic fuses installed in the fuse box, there are 1 or more circuit breakers and a flasher relay.

For access to the fuse panel, remove the fasteners from the lower edge of the cover, then pull the cover downward until the spring clips disengage from the instrument panel. On the base models, the cover simply snaps on and off.

The locations of various fuses are illustrated in the owner's manual, and in some cases, on the cover of the fuse panel (in the pic check inside the circle).

5a08647.gif

Hope that helps.

Jan 22, 2010 | 1993 Subaru Loyale

1 Answer

No turn signals or hazard lights


Check the FLASHER, also can review the Fuses, located inside the passenger compartment, under the drivers-side of the instrument panel.

Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel.

The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel.


0c18614.jpg

To access the fuses, remove the fuse panel cover. Note the spare fuses (A) and provided fuse puller tool


108630c.jpg

Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 1


de415d0.jpg

Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 2


6cf9ee7.jpg

Fuse panel and power distribution box identification for 1995-99 Explorer/Mountaineer models-Part 3


Power Distribution Box
Located under the hood, in the engine compartment. It houses the fuses and relays for most of the under hood components which are not controlled by a dash mounted switch (such as the alternator, fuel pump, ECM, etc.). The fuses and relays are replaced in the same manner as the fuse panel inside the vehicle. The power distribution box cover is hinged on one end and utilizes a retaining latch on the other. Simply release the latch and lift the cover up to gain access to the fuses and relays.

Hope helped with this; remember rated this help. Good luck.


Nov 12, 2009 | 1999 Ford Explorer

3 Answers

91 Chevy K5 Blazer turn signal flasher


located under the instrument panel to the left of the steering column. The fuse block should be visible from underneath the steering column, near the pedal bracket.

47a6e67.gif
Some models may use an underhood fuse/relay panel


If the panel is not visible, check for a removable compartment door or trim panel which may used on later models to hide the block. This panel is usually located on the left end of the instrument panel.
The convenience center is located just below the instrument panel on the drivers side. It contains individual relays such as the seat belt and ignition key alarm, and flasher.
On newer model vehicles there is an underhood fuse/relay center contains both mini and maxi fuses, as well as some relays.

Replacement The turn signal and hazard flasher units are usually located in the convenience center located just below the instrument panel on the drivers side. Replace the flasher by unplugging the old one and plugging in the new one. Confirm proper flasher operation.

Nov 03, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

FUZE BOX DIAGRAM FOR 1990 MERCURY TOPAZ


Replacement
  1. Access the fuse panel from the left of the steering column.
  2. Locate the blown fuse and pull out. DO NOT TWIST.
  3. Take note of the ampre number written on the top of the fuse. To install:
  4. Push a new fuse of the same ampre into the receptacle, making sure the contact is being made on both sides of the fuse.
LOCATIONS Headlights and Highbeam Indicator
  • One 18 amp circuit breaker (22 amp in 1987 vehicles) incorporated in the lighting switch.
Front and Rear Marker, Side Parking, Rear and License Lamps
  • One 15 amp circuit breaker incorporated in the lighting switch.
Windshield Wiper
  • One 4 1⁄2 amp circuit breaker located in the windshield wiper switch.
Power Windows
  • Two 20 amp circuit breakers located in the starter relay and the fuse block.
Power Seats and Power Door Locks
  • One 20 amp circuit breaker located in the fuse block.
Hazard Flasher REMOVAL & INSTALLATION NOTE: The hazard warning flasher is located on the rear side of the fuse panel.
  1. Locate the hazard flasher in the fuse panel.
  2. Pull the flasher out. DO NOT TWIST. To install:
  3. Push new flasher into place making sure a good contact is made with both terminals.
  4. Test flasher to make sure they function properly.
Various Relays LOCATION Cooling Fan Controller
  • Located behind the left side of the instrument panel.
Cooling Fan Controller Module
  • Located behind the right side of the instrument panel.
Cooling Fan Relay
  • Located in the air conditioning cooling fan control module.
Electronic Control Assembly
  • Located under the left side of the instrument panel.
Electronic Engine Control Power Relay
  • Located behind the glove box on the right side of the instrument panel.
Fuel Pump Relay
  • Located behind the glove box.
Horn Relay
  • Located in the fuse block.
Fig. 1: Main fuse box located on driver's side to the left of the steering wheel, above the brake pedal

e55ee77.jpg
This is the best info I could find....I hope this helps ya!

Jul 23, 2009 | Mercury Topaz Cars & Trucks

Not finding what you are looking for?
1993 Saturn SW1 Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...