Question about 2000 Dodge Durango

2 Answers

Engine codes what does these codes mean P0353 P0351 P0355 P0455 trying to pass emisions test

Posted by on

  • Anonymous Mar 16, 2014

    car runs rough, hesitates check engine light is on ,blinking and sometimes on steady

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hi !the three codes po353,351 and355 refer to the ignition coil po455 refers to evap emission control leak [LARGE} HOPE THIS HELPS

Posted on Nov 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

PO353 is: Ignition primary fault cylinder 3
PO351 is:
ignition coil 1 primary circuit
PO355 is:
ignition coil e primarysecondary circuit malfunction
PO455 is:
EVAC Control System Leak Detected

there you have them! these are the codes and their meanings.

Posted on Jun 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

01 Audi A6 p0351 p0352 and p0353


Look at fuel trim on a professional scanner

You still have the same codes for the same cylinder
misfires,IF the codes are correct

The misfires could come from valve issues,the valves themselves
or the variable cam actuators if that applies,or from fuel issues,but
not as likely on all three cyl on same bank

You need to do a cylinder leak down test on all cylinders--to eliminate mechanical issues

Then a cylinder contribution test electrically with scope software

Then scope the timing events,the cam advance events,the crank
position, all layered on the same screen & see if they line
up where they belong.

If the cams are not the issue, then your left with a serious vacuum
leak in the intake on one bank.

What I'm saying, is you have one bank with misfires apparently
not now from the ignition since the coils were replaced

Mar 19, 2014 | 2001 Audi A6

1 Answer

I have a 2001 jeep grand cherokee and it giving me four code p1391 p0351 p0352 p0353 i will like to know the problem please


For some reason you question has been duplicated several times, so I will answer this one.
Code 1391 may be a problem with the ABS system, the other three codes are concerning the first 3 coils. Your engine has direct spark so each cylinder has its own coil.
I would clear the codes and see which ones come back after a test drive. If the three coil codes come back the coils would need to be tested.

Dec 19, 2012 | 2001 Jeep Grand Cherokee

1 Answer

Po351 po352 po353 po354 po355 po356


Misfire P0351,P0352,P0353,P0354,P0355, P0356 Meaning secondary circuit A,B,C,D,E,F . You may need a PCM If your car has a NGC controller it may have melted the ignition coil mounted on the spark plug. For these to happen You have a defective coil driver circuit in the PCM . This is a multiple coil failure, Before we go there lets do the basic are the connector connected? How about the conection at the juction area all connected, then pcm failed. These are secondary what is the secondary the signal that allows the coil to collapse the magnetic field and gives spark.

Apr 23, 2011 | Chrysler Concorde Cars & Trucks

2 Answers

Codes p0351, p0352, p0353 and p1391. jeep won't start or runs poorly


obdii-code-p0351-x2-704058/index4.html">http://www.jeepforum.com/forum/f13/help-obdii-code-p0351-x2-704058/index4.html

This thread basically says replace the crank position sensor and the cam position sensor. Check the wiring for the Oxy sensor(s). And if all else fails then change the PCM.

Nov 27, 2010 | 2003 Jeep Grand Cherokee

1 Answer

I am change out a direct ingnition coil, which is the c coil?


"C" stands for cylinder #3. Facing the engine from the front of the car, the cylinders go A, B, C, D left to right (i.e., A closest to passenger side). To test you coil, change it with another. Codes are specific to each cylinder. A = P0351, B = P0352, C = P0353, and D = P0354.

Oct 18, 2009 | 2006 Toyota Corolla

1 Answer

2003 vw jetta gl 2.0 have codes p0351,p0352 and p0353


p0351- ignition coil A primary or secondary fault
p0352- ,, ,,,,,, ,,,,, B ,,,,, ,,,,,,, ,,,,,,,,,,,,, ,,,,,
p0353 - ,,,,,,,,,,,,, C,,,,,,,,,,,,,, ,,,, .,,,,,,,,,,,,,,,,
you may have a problem with yuor ingnition system

Sep 30, 2009 | 2003 Volkswagen Jetta TDI

3 Answers

Misfiring


Have your ignition coils replaced

Sep 04, 2009 | 2002 Dodge Stratus

Not finding what you are looking for?
2000 Dodge Durango Logo

1,942 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...