Question about BMW X5 Series
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If wiggling the wires cured the code, then one of the wires is broken inside the insulation. Pull on each wire one at a time. look for the colored insulation to stretch, this will be the broken wire. For the other car that wont rev up, this is a common when the catalytic concverter is plugged up. This will also cause MAF codes, and in turn, TRAC OFF light.
Posted on Oct 17, 2008
it almost sounds like a fouled fuel injector. this is a tricky problem because it involve so many different operations. the maf is used to deliver fuel and the o2 sensor tells how much. there are 2 o2 sensors one before cat 1 after. mabey check these out visually. the computer should pick these sensors up if there bad. is this a supercharged engine? ill try to come up with some other ideas for you soon.
Posted on Mar 12, 2009
could be two things, 1; the coil is going bad. 2; the electronic egr valve has a piece of carbon in it. the latter is probably the problem. to fix this , just remove the valve, push on the piston and while holding it in the open position, spray with carb cleaner and blow it out, release the piston and be sure the valve is closing all the way. if the gasket is damaged you can get a new one at the parts store.
Posted on Dec 18, 2009
Tips for a great answer:
Jun 14, 2017 | Cars & Trucks
May 03, 2016 | 1992 Mitsubishi Expo
Jun 10, 2015 | Cars & Trucks
Jan 09, 2014 | Toyota 4Runner Cars & Trucks
Dec 13, 2013 | Cars & Trucks
Feb 28, 2013 | Cars & Trucks
Feb 25, 2013 | Cars & Trucks
Feb 10, 2013 | 1993 Plymouth Acclaim
Sep 15, 2012 | 2000 Toyota Corolla
Jun 17, 2008 | 1996 Mercury Sable
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: