Question about 1992 Honda Accord

3 Answers

The clutch peddle will not come up it stays on the floor

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 2,422 Answers

Check on the upper part of the pedel to see if the clip that connects the pedel to the clutch master cylinder has poped off If the clutch pedel is on the floor this is a likely sulition and relitively easy repair you just reattach the clip

Posted on Nov 06, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The same thing happened on my son's car last week. It is either a bad cluthch master cylinder or a bad slave cylinder. I replaced both and it ended up being the slave cylinder. Both were semi easily replaced by us with the instructions in the shop manual. Be sure to bleed the system after fixing.

Posted on Dec 04, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

Inspect and bleed Clutch master and slave cylinders. Replace defective parts. Fill out with new brake fluid.


the clutch peddle will not come up it stays on the - global1207_0.jpg

Posted on Nov 06, 2010

  • global1207 Nov 06, 2010

    Check and replace Clutch Pedal Return Spring.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75051 Answers

SOURCE: 2000 cavalier clutch pedle goes to floor when pushed and stays there, clutch not working no pressure

You are going to have to replace the master and slave cylinders for the hydraulic clutch, the seals have failed in the slave, but from past experience they should always been replaced as a pair.

Posted on Oct 12, 2008

  • 396 Answers

SOURCE: clutch on 2003 grand am

No difficult. But if you are going to attempt to fix it, purchase you a repair manual for a 203 pontiac.

Posted on Aug 15, 2009

  • 115 Answers

SOURCE: need to bleed clutch to get peddle

try to vacuum bleed the system at the master most hand vacuum kit come with adapters to fit over the master reservoir otherwise the system may need a new master or you may have a leak

Posted on Sep 04, 2009

  • 1619 Answers

SOURCE: clutch peddle dropin to floor we have changed

Bleed the air out of the line and tighten bleeder points after doing so.

Posted on Apr 13, 2010

  • 81 Answers

SOURCE: 1992 subaru clutch peddle stays

In 199l they were cable so I would look under the dash at the top of the peddle. Wiggle it and make sure everything is connected and not broken. If it is hydraulic there wont be a cable up there it will be a bar going into the cluctch master cylinder. Look for wet look (leaks) around the cylinder and wall. or peeling paint can be a sign of leakage. Then check under hood for fluid in the resivoir. if ok follow the lines to transmission and check clutch slave cylinder on trans. for leakage. Leaking indicates failed part and needs replacing. After repair proper bleeding is required to restore functionality.

Posted on Feb 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HI. The clutch peddle on my citroen C4 1.6 HDI stays on the floorboard when pushed please help.


Check this forum:
http://www.citroenpicasso.org.uk/picasso/index.php/topic/18177-sticking-clutch-pedal/

Sep 21, 2016 | Citroen Cars & Trucks

1 Answer

Owners manual


did you bleed it? there could be air in it and that causes a hydrolock in a sealed system. same with brakes.

Feb 06, 2014 | 1996 Pontiac Sunfire

1 Answer

Clutch peddle wont go all way to the floor


Clutch fluid level low, bad slave cylinder, bent linkage

Sep 22, 2013 | 2003 Hyundai Tiburon

1 Answer

Clutch pedal staying down but there's plenty of fluid in resiviour


Probably bad clutch master cylinder and/or slave cylinder. I always replace both.

Oct 04, 2012 | Cars & Trucks

1 Answer

I own a 1995 Audi 90cs. My clutch peddle started being dead tell half way down then got preshure. Now there is no preshure and the peddle sticks to the floor. There was no slipping in the clutch so I


You need to replace the clutch slave.....Ii recently did mine, after the installation it was stuck too.......the way I fix it was I had a friend pumping the clutch by hand while I bleed it under the car, it took about 15-20 minutes before it got hard again.
Good luck!

Aug 01, 2012 | 1995 Audi 90

1 Answer

The clutch peddle went to the floor when i pushed the clutch peddle in


Check the floor by the clutch peddle if it is wet (you may need to look at the very top of the peddle)than you problem is the clutch mastercylinder

Jan 31, 2011 | 1994 Nissan Pickup

3 Answers

Clutch peddle goes to the floor


Do you mean that stays to the floor because the clutch peddle has to reach the floor. If that is what you mean then probably you need a knew clutch or if it is hydraulic maybe it reflling and dicomression.

Jan 28, 2009 | 1999 Hyundai Accent

1 Answer

2000 cavalier clutch pedle goes to floor when pushed and stays there, clutch not working no pressure


You are going to have to replace the master and slave cylinders for the hydraulic clutch, the seals have failed in the slave, but from past experience they should always been replaced as a pair.

Oct 12, 2008 | 1998 Chevrolet Cavalier

Not finding what you are looking for?
1992 Honda Accord Logo

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...