Question about 1989 Toyota Pickup SR5

1 Answer

I have a 1989 toyo pickup W/ 125xxx mi. , EFI 4 cyl. 5 speed . Tranny wouldnt go into 4th gear , was told the synchro`s were going out . So I went out and picked up a salvage tranny w/ 74xxx mi. And a new clutch. And Its doing the same damn thing ! Just like before , barely goes into 4th and you have to hold it there w/ pressure to keep it from popping out ! Adjusted the pedal both way . No difference . Then was told it was probably the shifter cup? on op of the tranny where the shifter ball sits in (under the plate ) . Worn out ? Or could it be the Slave Cylinder? And if so ,ow would I tell if its the slave or not ?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! I do suspect the slave cylinder. Theres no way find out if it's worn till you detach it. The rubber seals are surely worn causing it to fail. Try to replace the slave cylinder as a first course of action. Hope this helps and thank you for using FixYa!

Posted on Nov 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 1500 chevy 4 4 5 speed 4 gear grinds


The hub and sleeve is worn out. It will need a 4th/5th gear hub and sleeve and small parts kit

Aug 11, 2014 | Chevrolet Chevy Cars & Trucks

1 Answer

I can only get 4th gear on my 2000 geo metro what do i do to fix it


I suggest that you have to pull the box and do a full overhaul on it. From your description you will need 5thgears and synchros--bearings -all gears synchro kit and may be some gear dogs as well. Consider a replacement box from the wreckers as it would be cheaper.

Nov 16, 2013 | Cars & Trucks

1 Answer

Changed plugs and plug wires in 1989 F 150 and it runs rougher than before need diagram


V8 engines as follows:

289,302,5.0L(Carb.)
390,406,427,428
400,460

(cyl numbers)

Front (engine)
5 1
6 2
7 3
8 4
(firing order)
1-5-4-2-6-3-7-8


5.0L EFI
351, 5.4L, 5.8L

(cyl numbers)

Front (engine)
5 1
6 2
7 3
8 4
(firing order)
1-3-7-2-6-5-4-8

Hope this helps, let me know.

Aug 03, 2010 | 1989 Ford F 150

1 Answer

When driving in 5th gear should the RPMs run at 3000 RMPS. Mine is a 4 cly 5 speed


You don't provide much information to go on (type of vehicle, type of engine, 2wd or 4wd, etc.) RPM is always going to be based on the speed you're traveling with a standard transmission. My 4 cyl 5 speed Nissan pickup in 5th gear runs at 3000 RPM at about 75mph.

May 18, 2010 | Cars & Trucks

2 Answers

I have a 92 2 wheel drive Toyota pick up 5 speed transmission 2.4 liter engine. When I let up on the gas while in gear there is clicking/rattling noise in all gears except 4th gear. If I push down on the...


Sounds like you have a defectine cluthch componant. Best way to verify is get the rear axle off the ground . So as not to let the rear drive wheels make contact with the ground. Have an assistant start the truck and put it in gear. After making sure the vehicle is secure crawl under the vehicle and listen to comfirm that the noise is coming from the clutch area.

Mar 25, 2010 | 1992 Toyota Pickup

1 Answer

I have a 2000 Jetta 5-speed shifter won't engaged in any gears.


your synchros are probably worn.

Does the MPH go up when you have it in gear? If so this may be because the axles are not engaging the tires because they are not connected properly. If it doesnt go up then it could either be your tranny or synchros

Jul 04, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

Can't find 5th gear on my Jetta gearbox


Get a new one froma reliable source. It may be a 5 speed gearbox but it sounds like the synchros are gone on that one.

Jun 30, 2009 | 1989 Volkswagen Golf

1 Answer

1st and 2nd gear went out


Check your shifting forks, they are probably worn out

Jun 28, 2009 | 1995 Ford F150 Styleside Regular Cab

1 Answer

1995 Nissan XE Pickup Transmission Problems-PLEASE HELP


your luck as with mine is not good. thought I had a bad bearing, after droping the tranny and seperating the housing, I have a broken counter shaft. after looking for another with no luck, the tranny shop informed me that was common for these transmissions. parts are expensive, to rebuild would cost aprox.$800.00 or more. the main cause is the front bearing is supported in alum. causing shaft to move which first takes out the bearing, then the strain snaps the shaft. taking out all gears except 4th and only moves while in 4 wheel drive.

Apr 13, 2009 | Nissan Pickup Cars & Trucks

1 Answer

Clutch or tranny


Ok, Clutch engagement point should be midway or just before midway in relation to total travel.(pretty much the same in any clutch vehicle) assuming that if put in lets say 1st gear, with clutch in,then engine started, when clutch is released, car does not move but there are no unusual noises (grinding from inside trans.) If this is the case, I'd first check linkage for adjustment. If OK, remove the trans and look inside for broken gears, excessive metal debris etc.If shift rails are internal it could be that shift forks are sliding on rails and failing to engage synchros.

Jan 01, 2009 | 1998 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...