Question about 1999 Hyundai Accent

1 Answer

Im trying to instal my tach on my 99 hyundai accent hatchback witch wire on the coil that i connect too

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

The "Green" wire from the after-market tachometer will connect to the (-) negative side of the ignition coil.

The "Red" wire from the tachometer will connect to an ignition source that has power only when the key is in the "Run" and "Start" position, usually at a "IGN" source on the fuse panel.

The "Yellow" or "White" wire from the tachometer will connect to the instrument panel lighting fuse in the fuse panel usually marked "LPS" or "IP" and there should be a source next to the instrument panel lighting fuse to connect the wire.

The "Black" wire should be connected to a good body ground, and if the tachometer is not properly grounded anyone sitting in the vehicle while the engine is running will receive a mild electric shock from the ignition coil primary voltage whenever anything metal inside of the vehicle is touched.

Posted on Nov 05, 2010

  • Zaraki Nov 07, 2010

    For the "Green" wire from the tachometer, that should connect to a Brown/Red or a Blue/Yellow wire at the coil pack on your vehicle. Be certain that you tap into the wire and do not cut it apart. The wire can be tested using a simple test light, and with the engine running the test light should flash or pulse indicating a dwell signal.

  • Zaraki Nov 07, 2010

    Here is a diagram.




×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I arrange my spark plug wires on my Hyundai Getz go 2002


How to change spark plugs hyundai accent 01 - 05 - YouTube

? 3:18
https://www.youtube.com/watch?v=tU2vwisJ7v4
Feb 16, 2012 - Uploaded by PNBNC
I filmed this right after changing my old plugs, I figured it was easy enough to film and some people can profit from it. for a ... Coil, you mean wire lol ... When you go to put the spark plug back in, never start it with the ratchet.

How To Replace Change Install Spark Plugs 2001-06 ...

? 3:17
https://www.youtube.com/watch?v=yVV2KcPDFIo
May 14, 2013 - Uploaded by 1A Auto Parts
... spark plugs. This video is applicable to the 2001, 2002, 2... ...spark plugs. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra 2.0L. ... +queentonks A little know-how can go a long way. We're glad ... When do you think is good to replace my spark plugs wires? My spark ...
2001 Hyundai Accent Firing Order: Engine Mechanical ...www.2carpros.com/.../hyundai-accent-2001-hyundai-accent-firing-orderApr 23, 2009 - Engine Mechanical problem 2001 Hyundai Accent 4 cyl Two Wheel Drive Manual 95000 ... Now I'm trying to figure out how they go back on. How do I find out the Engine Firing Order for my car - Hyundai Accent 2001 1.5L?Which is cylinder 1 - 1.6 Accent - Hyundai Forum: Hyundai ...www.hyundaiperformance.com/.../16837-cylinder-1-1-6-accent.htmlJan 13, 2003 - 3 posts - ‎3 authorsFrom what I read though, the coil pack is configured as 1 4 2 3. I'm assuming the first wire on the coil pack goes to cylinder 1. Can anyone ...

Dec 16, 2015 | Hyundai Cars & Trucks

1 Answer

2007 hyundai accent ..no horsepower


run fault codes and check for faults . Don't guess as that costs dollars

Nov 17, 2013 | 2007 Hyundai Accent GS Hatchback

1 Answer

Key for hatchback 99 hyundai accent l


Leave a comment if you need more help.
Thanks for using Fixya.

Jun 27, 2012 | 1999 Hyundai Accent

1 Answer

02 Hyundai Accent GS, Does horn actually need a relay to operate? Lifted fuse box to check, suddenly there is no relay. And didnt remove, yet horn stopped working. Tried external switch, wiring INTO the...


I actually have the same problem. I replace the actual horn but admittedly wit a new one. Want to try the relay first but cannot get it to come out or find the new one.

Aug 16, 2011 | 2007 Hyundai Accent GS Hatchback

1 Answer

Need a wiring diagram for a 99 hyundai accent tape deck


1999 Hyundai Accent Car Stereo Radio Wiring Diagram Car Radio Constant 12V+ Wire: Red/Yellow Car Radio Ignition Switched 12V+ Wire: Blue/White Car Radio Ground Wire: Black Car Stereo Illumination Wire: N/A Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger Wire: N/A Car Stereo Amplifier Trigger Wire: N/A Front Speakers Size: 5 1/4′ Front Speakers Location: Doors Left Front Speaker Wire (+): White/Red Left Front Speaker Wire (-): Black/Red Right Front Speaker Wire (+): White/Blue Right Front Speaker Wire (-): Black/Blue Rear Speakers Size: 6 1/2′ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): White/Red Left Rear Speaker Wire (-): Black/Red Right Rear Speaker Wire (+): White/Blue Right Rear Speaker Wire (-): Black/Blue

Jan 02, 2010 | 1999 Hyundai Accent

1 Answer

Get multiple misfire codes. P0300 - P0303. If this


This could be a coil problem but i would start by changeing the plug wires and checking each plug.

Nov 17, 2009 | 2007 Hyundai Accent GS Hatchback

1 Answer

I amcurrently searching for a diagram to wire up my RPM gage but I don't know where to put the wires!!!! I really need help!! thx:)


The RPM guage (tachometer) reads the spark impulses from ground terminal of the high voltage sending unit. I've never had to install a tach on an Accent, but for the most part the wire (on other model Hyundai's) is green and connects to the distributor primary or negative (-) side of the ignition coil. And then to the Tach terminal. Do not connect to coil on If yours is an MSD ignition, do NOT connect to the coil!!. Some electronic ignitions have a tach terminal on the ignition box, the green wire may connect there. Hpe this helps....

Oct 10, 2009 | Hyundai Motor 1998 Accent

2 Answers

I need to find a wiring diagram for a 99 hyundai accent


Which wires do you need to re-connect? Bbattery cables: red/postive will connect to your starter/solenoid and the black/negative cable will be connected to your chassis by a bolt in the engine compartment.

Aug 29, 2009 | 2000 Hyundai Accent

1 Answer

My 2000 hyundai acc


Possibly coils check compression make sure the plugs are the proper ones some engines are particuler about the plugs

Mar 04, 2009 | 2000 Hyundai Accent

Not finding what you are looking for?
1999 Hyundai Accent Logo

643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...