Question about Honda Pilot

1 Answer

New belt install for got how it is routed - Pilot Honda Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

There should be a diagram under the hood of the car or truck you are working on.

Posted on Nov 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace a belt tensioner in a 2004 freestar


First get the new part and also a new belt.,small tube of blue lok-tight..Use safety glasses and work on cold engine..You can also disconnect negative cable from battery for safety in case you drop a tool on alternator and create an arc that could blow a fuse or worse..set parking brake and in park...Look at belt configuration and draw your own picture of the routing...However you should have a small sticker under hood that shows you the correct routing...You will need a good long slim Ratchet to remove belt and tensioner.also regular socket set with short well metric sockets..They make a special slim tool to remove and install belt..It makes it a lot easier...Remove belt...,remove tensioner...Pay close attention how tensioner sets in place..Install new tensioner in same position..use blue lok-tight on bolt threads to mount tensioner..torque it tight but not too tight,,.Install new belt.,Make positively sure belt sits in all grooves of all pulleys while routing..Double check routing again to make sure belt is perfectly set in all pulleys..Tug on belt with hand to make sure all is good and fit....Make sure all tools are removed from under hood before starting engine .......Start engine to verify all is correct...

Jan 31, 2015 | 2004 Ford Freestar

1 Answer

What is the correct 2007 sonata sepentine belt routing i installed a new altenator but aqm having trouble?


If the belt is tight, then it was probably routed around all the pulleys correctly.

Aug 10, 2014 | 2007 Hyundai Sonata 2.4

1 Answer

Johndeere gx75 drive belt diagram


I broke a drive belt on my gx75 and need to know proper routing and installation for new one AmanStino Ultra Slim Lightweight Smart shell Stand Cover with Auto Wake...

Jun 15, 2012 | Cars & Trucks

1 Answer

How simple is it to change a alternator belt on subaru svx?


  1. Removing the Serpentine Belt
    • 1 Park your Subaru on a level surface and open the hood.
    • 2 Disconnect the ground (black) battery cable using a wrench. This will prevent the cooling fan from activating.
    • 3 Locate the serpentine belt routing diagram in your engine compartment and compare it to the actual routing of the installed belt. Make sure the routing on the label matches the actual routing. If they do not match or there is no label, note the actual routing on a piece of paper for later reference.
    • 4 Locate the belt tensioner pulley on your Subaru model. If the tensioner is equipped with a squared hole, use a large breaker bar with a 1/2-inch (13 mm) drive. Otherwise, use a ratchet and socket of the proper size on the tensioner pulley center bolt.
    • 5 Rotate the tensioner pulley away from the belt to release the belt tension.
    • 6 Pull the belt off of one of the pulleys and slowly release the tensioner pulley back into position. Do not let the tensioner pulley snap back or you may damage an internal component.
    • 7 Finish removing the serpentine belt from the rest of the pulleys and the engine compartment.
    Installing the New Serpentine Belt
    • 1 Match the old belt to the new one and make sure they are of the same length and configuration. It is normal for the new belt to be slightly shorter since the old one has been stretched through use.
    • 2 Route the new serpentine belt through all of the pulleys except the tensioner pulley. Use the diagram on the engine compartment or your notes, as a reference, to properly route the belt.
    • 3 Insert the large breaker bar into the square hole or the ratchet and socket into the tensioner pulley center bolt.
    • 4 Rotate the tensioner pulley in the same direction you did to release the belt tension.
    • 5 Slide the serpentine belt onto the tensioner pulley.
    • 6 Release the tensioner pulley back into position.
    • 7 Look at all the pulleys and make sure the serpentine belt is properly seated on each one. Otherwise, release the belt tension and adjust the belt.
    • 8 Connect the ground (black) battery cable using the wrench.

Oct 18, 2011 | 1992 Subaru SVX

1 Answer

How to replace a serpentine belt in a ford winstars


e

b1513bf.jpg

Fig. Accessory drive belt routing-3.0L engine



21dafdb.jpg

Fig. Accessory serpentine belt routing-3.0L engine


96f660b.jpg

Fig. Accessory serpentine belt routing-3.8L engine


Removal and Installation

2928bae.jpg

Fig. Drive belt tensioner wear indicator marks


2375d13.jpg

Fig. Place a wrench on the drive belt tensioner bolt and rotate the assembly clockwise to relieve belt tension

Using a 15mm wrench attached to the drive belt tensioner pulley, rotate the tensioner clockwise to release the tension. Remove the drive belt from the pulley. When installing the new drive belt, ensure that the drive belt is routed correctly and note the position of the indicator mark on the tensioner.

Hope heled with this; remember rated this help. Good luck.

Nov 12, 2009 | 2000 Ford Windstar

2 Answers

Diagram for installing serpetine belt 1987 ford 4.9 liter


Belt removal instructions (and routing information) may be found on a sticker under the hood. I have posted a picture of the diagram below if these instructions have faded. The routing on the left is without the AC.

9e28c3f.jpg

Nov 10, 2009 | 1987 Ford F 250

1 Answer

How do I change the timing belt on a 2003 Tiburon


2003 Hyundai Tiburon 2.7L MFI DOHC 6cyl

Inspection
Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.
Removal & Installation
  1. Raise and support the vehicle.
  2. Remove the engine splash shield.
  3. Rotate the drive belt tensioner clockwise to release the drive belt tension.
  4. Remove the drive belt from the alternator.
  5. Slowly release the drive belt tensioner.
  6. Remove the drive belt from the accessory drive pulleys.
To install:
  1. Install the drive belt to the accessory drive pulley.
  2. Rotate the drive belt tensioner clockwise.
  3. Install the drive belt to the alternator.
  4. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
  5. Slowly release the drive belt tensioner
  6. Install the engine splash shield.
  7. Lower the vehicle.
b3e0cbe.jpg

Fig. Accessory drive belt routing-3.0L and 3.5L engine


4a6b54d.jpg

Fig. Accessory drive belt routing-2.5L and 2.7L engines


3b0d2d5.jpg

Fig. Accessory drive belt routing-2.4L engines


6470b70.jpg

Fig. Accessory drive belt routing-2.0L engines


6d43bf5.jpg

Fig. Accessory drive belt routing-1.5L engine


508cf9b.jpg

Fig. Accessory drive belt routing-3.0L engine


99b1d12.jpg

Fig. Accessory drive belt routing-2.5L engines


97529b0.jpg

Fig. Accessory drive belt routing-2.4L engines


5cd1383.jpg

Fig. Accessory drive belt routing-1.8L and 2.0L engines


3e72758.jpg

Fig. Accessory drive belt routing-1.5L engine


2aafa70.jpg

Fig. Accessory drive belt routing-2.4L engines


aa6cd2c.jpg

Fig. Accessory drive belt routing-2.0L engines


4081274.jpg

Fig. Accessory drive belt routing-1.5L engine


I hope help you with this (remember rated this help) Good luck.

Sep 15, 2009 | Hyundai Tiburon Cars & Trucks

2 Answers

I replaced the "water pump", i need to know the serpetine belt route and how to install the new belt


Go to this website : autorepair.about.com/library/images/b1869a-lib.htm Theres your belt route. After that belt is run put a I believe it's a 5/8ths or 9/16ths socket on the tension pulley. Pull down on it and you should be good to go............Thank you for using Fixya.com..........Please rate this solution...thank you!

May 15, 2009 | 1996 Buick Park Avenue

1 Answer

Serpentine belt routing


Here you go.. I looked up the same belt you did, it should be right.

adecd3f.png

Feb 09, 2009 | 2001 BMW 330

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...