Question about 2003 Honda Element
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if your not getting any air coming out of the vents then your problem is your blower motor. test the wire harness to see if its getting power,if it is then your blower motor is bad if its not getting power then check your relay.
Posted on Jan 17, 2009
Switch is most likely the culprit...this starts to get tough, if you can't locate a switch at a local junkyard...Personally, I'd have it DIAGNOSED at the dealership ($40-50)...Then, take it to a mechanic for repair or do it yourself.
Posted on Jun 23, 2009
Remove the screws on the glove box, then on the side of the dashboard you will see two caps. Remove the caps and you will see two nuts that you have to remove. once you have removed the bolts, you can remove the straps on the blower and evaporator. once you remove the straps have some one help you lift the end of the dashboard up carefully to give you room to remove the blower. and disconnect the connectors. You will have to play a little bit to remove because of the tight space.
Posted on Jul 22, 2009
SOURCE: 2004 honda element. The ac,
First I would check to see if the blower motor connector is not loose and the wiring in that connector. I corrosion is seen clean it out with a mix of baking soda and water. It sure sounds like a loose connectiom for the display will light from any low voltage supplied although the blower needs full voltage to operate
Posted on Sep 18, 2011
Tips for a great answer:
on Jun 21, 2011 | Honda Accord Cars & Trucks
HEATER BLOWER MOTOR
faulty blower motor resistor. The low and medium speed on blower motor is
controlled by resistor and its actual speed is high. So because resistor is not
working, blower motors actual speed which is high is working.
can be faulty blower motor or faulty blower motor resistor. Get the blower
motor inspected. If it's faulty it has to be replaced.
blower motor testing and replacing, check the link below: ----
These will help.
Nov 28, 2012 | 1988 Honda Accord 4 Door
Oct 13, 2011 | 1997 Honda Civic
Jan 31, 2011 | 2002 Honda Accord
Dec 17, 2010 | 1998 Honda Passport
RESISTOR REMOVAL & INSTALLATION The blower resistor is located on the front of the blower housing.
Oct 24, 2010 | 1995 Honda Civic
Jan 24, 2010 | 1998 Honda Civic
Oct 22, 2009 | 1996 Honda Passport
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: