Question about 1991 Buick LeSabre

1 Answer

My Electic Front Drivers set Will not go Back and Forth It ia a 1991 Buick La Sabre

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 528 Answers

First you'll need to determine if the fuse and / or relay is good. If so, then check the seat switch by ' hotwiring ' ( running a positive wire from the battery to the positive side of the switch ) . if the hotwire worked, your switch is bad - if not then you may have a bad seat motor or corroded connection. You may need to remove the seat from the vehicle to further test connections and / or run your hotwire to the positive side of the motor, which may be difficult at best. I'd check the fuses first, then relay, the call your local shop since everything else can get complicated.
Good luck!

Posted on Nov 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 Buick Le Sabre- both front power windows will not go down. Wondering if a fuse since it's both of them. Where are the fuses for the windows? Is it one fuse for all or one for each window? If...


drivers door switches have module that controls all the window check for window module fuse first then the module for power in and power out might be ground also

May 28, 2011 | 1991 Buick LeSabre

1 Answer

What size tires are recommended for 1991 le sabre ltd will p175/?r14 be too small? right now I have P205/75r14 on the front and p215/70r14 on the back


The 1991 Lesabre came with both 14 and 15 inch wheels and the recommended tire sizes are:

P205-75-14
P215-65-15
That said, tire sizes with different aspect ratio's are ok, as long as the front and back tires are the same brand, mixing different tread designs is a no no.

Jan 06, 2011 | 1991 Buick LeSabre

1 Answer

2000 buick la sabre was working very well. it sat


try dumping some gas line antifreeze into the tank

Jul 28, 2010 | 2000 Buick LeSabre

1 Answer

2002 Buick La Sabre. Some of the inst. cluster bulbs not light


Hello manderfield, The bulbs are replaceable but it requires complete disassembly of your cluster and above average soldering and de-soldering skills. The cluster removal process requires removing the trim molding that surrounds the cluster. There are several screws along the bottom and sides of the trim that you will need to remove before un-snapping the main section. You can lower the tilt steering wheel and place you transmission in low gear to help provide room for the trim and cluster removal. Thanks Mike www.kincerservice.com

Jan 11, 2010 | 2002 Buick LeSabre

1 Answer

Where is the horn on a 2000 buick la sabre


inner fender,under hood close to front of fender,could be left or right side or one on both sides

Oct 03, 2009 | 1995 Buick LeSabre

1 Answer

Do I need any special tools to remove driver side cv


nothing "special", but there may be torxs bit bolts on the caliper. I've had mine a really long time so to me they arent special anymore.Other than that it's all wrench and socket stuff.

May 28, 2009 | 2004 Buick LeSabre

2 Answers

Bucks when it comes to a hill until you kick into it, car serviced regularly.


sounds like u may need spark plug wires replaced, also has the fuel filter been replaced every 30,000 miles as recommended by Buick?

May 08, 2009 | 1991 Buick LeSabre

1 Answer

1991 buick la sabre


Its the distributor module. The module in the dist. that tells the plugs to fire. When it gets hot it shuts down till it gets cool again. Had that same problem on several cars.

Sep 29, 2008 | 1991 Buick LeSabre

1 Answer

Brake drums


There is no opening to access the rear drum adjuster. Grab a good size hammer and hit the outside of the drum directly on the flat part to loosen it up, then just pull it off. Don't be afraid to hit it hard. And remember... Don't hit the lug studs! Hope this helps.

Jul 31, 2008 | 1991 Buick LeSabre

Not finding what you are looking for?
1991 Buick LeSabre Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...