SOURCE: 2004 Jeep Grand Cherokee - problem with power windows/locks
This seems to be the affects of a bad dinamo charging your battery . If you take a appart the dinamo you should fine a part called in mechanic terms "the bones" they look like 2 black magnets with a wire coming out of them . They are not expencive and you should not change your dinamo untill you try this first a car dinamo is very expencive .
SOURCE: the tail lights are out, so the brake lights-Jeep Grand Cherokee
i have a 2002 jeep grand cherokee i had the same problem when i would apply my brakes when the headlights were on my brake lights would go out, i found that my bulbsocket was not making good contact with the socket housing, if you notice when you take off a bulb, look at the light fixture where you unscrewed your breaklight bulb you will notice 3 medal contacts-they should be silver in the socket housing and like a copper on the socket bulb, in the socket housing their should be 2 silver contacts together and 1 by itself the one that looks by itself is making bad contact with the copper one thats by itself on the bulb, what you can do for a quick fix is; get a small piece of low cage wire or a thin piece of metal like copper stick that in to the bottom or top of that metal contact--i did it through the bottom leave the wire or piece of medal sticking out enough for where it can get contact with the bulb (just a little wire is enough to make contact, now screw the bulb on and test it---it will work----i did it to mine, if you need more assistance let me know [email protected]
SOURCE: 2005 jeep grand cherokee wont start
it happened to me i replaced the starter and it works fine now
SOURCE: 2005 jeep grand cherokee ac blows cold only on drivers side
I agree, these vehicles have a problem with the blend doors and since the accuators hit the door when it opens and closes, it breaks the doors. and it's a huge job to replace them.
SOURCE: 2000 jeep grand cherokee limited edition
I don't know of any real proceedure, Just make sure its full and there is no air traped in the system, If there are any bleeders like around the thermostat housing, or any where in the cooling system open them up while you fill it to let any air to excape If not just fill radiator untill your sure you can't get any more in it before you start it.
98 views
Usually answered in minutes!
×