Question about 2006 Dodge Magnum

1 Answer

I'm trying to install anco winter blades and can't seem to get them to click on the wiper arm .

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,763 Answers

Make sure you are sliding them all the way back and they should clip and lock, some of these anco blades are cheap and wont lock on they just slide back off, maybe try another brand, heres some picture to show you , hope this helps,I'm trying to install anco - johnjohn2_9.jpgjohnjohn2_10.jpg

Posted on Nov 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1990 Suburban needs new wipers, I bought the blades, however I dont know how to remove the old ones because it seems to have a different set up. you cant find just blades anymore it comes with the...


The 1990 Chevrolet Suburban has the most common hook-end wiper arms. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.

1990 Chevrolet Suburban Wiper Blade Installation Videos (hook-end arms)

1990 Chevrolet Suburban Wiper Blade Size Options w/Correct Lengths & Attachments

Sep 11, 2011 | 1990 GMC Suburban

1 Answer

Can not find replacement on after market windshield wiper


Hello henryk252: My name is Roger and I will help you.You did not say for sure what you needed. But the wiper blades are available from local part stores. The driver side wiper ia a C-24-BB (anco) and the passenger side blade is a C-21-BB (anco). If it was a wiper motor number? The part number for a part manufactured by the company A-1. There part number is 40-1071 and should be available from any parts store. This may be a special order part however. You can also obtain a new motor from the local dealership. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger.
(NOTE) Anco is a trademark name.

Jun 25, 2011 | 2008 Chevrolet Malibu

1 Answer

How to replace window blades?


It depends on which style of wiper arm you have. Most auto parts stores will install new wiper blades free - just ask them when you go in to buy.Don't buy the cheapest blades - you get what you pay for! I personally buy Bosch blades - being winter, I get the winter blades. Wiper blades are meant to last only 3 months and the life will be greatly shortened if you have tree sap or chemicals on the glass. Scrape the glass with a razor blade then clean with an alcohol based window cleaner and make sure you wipe the new blades with the alcohol wipe they come with, as most all blades have a chemical coating to delay rubber decay during shipping and pre - sale storage and this coating can cause streaking on your window. You may want to clean your existing blades with alcohol if they wipe good but streak or cause hazing on the windshield. Hope this helps and please rate my solution!!

Nov 22, 2010 | 2003 Buick Century

1 Answer

I need to adjust the wiper arm on a 1997 suburban, it hits the side of the window.


Wiper Arm & Blade (Front) Removal & Installation Wiper Blade To Remove:
  1. Turn ignition switch to ACCY position.
  2. Turn wiper switch to PULSE position and turn ignition OFF when wipers are stopped in the innerwipe position.
  3. Push the wiper blade clip button IN and remove wiper blade from wiper arm.
To Install:
  1. Insert wiper arm hook through opening in wiper blade.
  2. Place wiper blade pivot in the inside radius of wiper arm hook.
  3. Pull on wiper blade pivot into hook until it locks into place.
  4. Check wipers for proper operation.
Wiper Arm To Remove:
NOTE: Mark position of wiper blade on windshield to ensure proper position upon reassembly.
  1. Remove washer hose.
  2. Lift wiper arm from windshield and use a screwdriver to disengage retaining latch.
  3. Remove wiper arm from shaft.
To Install:
  1. Place wiper arm on shaft so that wiper arm aligns with marks placed on windshield.
  2. Press arm assembly on shaft and push retaining latch IN.
  3. Connect washer hose.
  4. Remove windshield markings and check wipers for proper operation.
prev.gif next.gif

Oct 26, 2010 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

How to install back wiper blade


If its a problem with the connectors , then use the original connectors, if that does not fit, then you have the wrong blades for this car. Hope that helps

Apr 10, 2010 | 2003 Jeep Liberty

1 Answer

Need to replace driver side wiper do not know how to get it off


I believe the blade is the same as my F-250, according to the manual. Pull the wiper away from the windshield, then push on either end of the blade, follow blade to pivot point at center, where blade pivots back and forth on wiper arm (wiper arm will not be moving as you do this). You need to push towards the windshield at this pivot point to push in on the wiper arm and out on the blade assembly to pop the round end of the wiper arm out of the hole in the blade assembly. Look at the new blade to see where this attaches. The new one should snap on to the arm when u squeeze the wiper arm to the blade. I prefer Exact Fit brand, as they seem to fit well. If u purchase at autozone, or advanced auto parts, they will install them for free.

Mar 24, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

I changed the wiper motor out.  They worked without the blades on, but after installing the blades they tried to move down toward the hood.  I think the motor still works but it seems the shafts are just...


you may of fitted the blades when the wiper motor wasnt in park

ok remove wiper arms turn ignition on turn on wipers then turn of by wiper swicth not key motor will stop in park position fit wiper arms in positon try and your done

Jan 08, 2009 | 1997 Acura TL Series

1 Answer

Don't know how to replace the wiper blade for honda accord, 1997


hi from uk have come up against this problem on hondas and if you wish ? you can replace the wiper rubbers as i have done by going to halfords or other motor supermart and purchase the rubber/blades either same length or longer ? then remove the steel blades from each side of the rubbers on wipers by pulling from bottom whilst flexing the wiper clear ok? then pull out the rubberblade with patience you can easily feed new rubber into w/blade /make sure you insert right way ie there is a notch in rubber that goes to top look carefully ? then re fit steel blades one at a time into grooves in rubber making sure the top locates into notch in rubber job done ! and huge saving on having to buy complete arms and blade in uk rubbers approx £4 a pair ps if you get the longer rubber you can cut to same size as old b4 fitting hope this helps ?

Jan 01, 2009 | Honda Accord Cars & Trucks

1 Answer

I have wiper blades for a different car, but. . .


Wiper blades On S-Series Saturns are 22" drivers & 21" pass.Hope This Helps

Dec 20, 2008 | 2002 Saturn Sl

1 Answer

Rear Wiper Blades


Anco 25-11 should fit, available at auto zone. countrycurt0

Oct 03, 2008 | 2001 Mazda Tribute

Not finding what you are looking for?
2006 Dodge Magnum Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...