Question about 1995 Honda Civic

1 Answer

Take out a 95 honda civic EX coupe engine

I need to take out my engine because i have a rod knocking. How do i disconnect the front axel from the engine? I have an engine hoist, stand, and general tools like socket and wrench sets.

Posted by on

  • dayronp Jul 03, 2008

    i need to change my left front axle on my civic automatic how can i do that

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

Remove the large nut on the end of the axle. Remove the outer tie rod end. Remove the upper spindle mount. There is a cover over the bolt. Remove the brake caliper and the lower ball joint and disconnect speed sensor if equipped. Remove spindle and pull the axle out. You may need a large flat head screw driver to pop the sxle out of the transaxle.

Posted on Jun 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Knock sensor location on a 2001 Honda Civic DX


images for Knock sensor location on a 2001 Honda ...

Honda knock sensor p0325 - YouTube

? 6:41
https://www.youtube.com/watch?v=yacSiSJ5Vc0
Feb 17, 2014 - Uploaded by Cody the Car Guy
do you know where is the knock sensor on a 2005 Honda accord coupe .... 2001-2005 Honda Civic Cam ...

Civic knock sensor - YouTube

? 1:28
https://www.youtube.com/watch?v=D1jk5OxuOB0
Jan 18, 2015 - Uploaded by chriizt1an
96-00 civic ex. ... Civic knock sensor ... 2001-2005 Honda CivicCam Position Sensor TDC Sensor & Valve ...

Honda Civic Knock Sensors - AutoZone




Jan 10, 2016 | Honda Civic Cars & Trucks

1 Answer

How do i change a cracked cylinder head in a 1994 honda civic ex coupe 1.6L engine?


Have a compression test done as it may be a head gasket and not cracked. Anyway the cheapest and most reliable procedure here is to have the job done professionally by a shop that specialises in Honda, Get a service exchange head is the answer and you should be back on the road in a day.

Dec 23, 2013 | Cars & Trucks

2 Answers

Location of knock sensor on a 98 honda civic v -tech 4 cylinder


It is on the lower left side of the engine (side towards firewall - see picture).
Knock sensor failures are pretty rare, why are you looking for it?

6_15_2012_11_29_26_am.gif

Jun 15, 2012 | 1998 Honda Civic

1 Answer

How i can replace the cranksaft for a 99 honda civic ex


If you need to replace a crankshaft for a 99 Honda Civic EX, it may mean that there's more damage to the engine than is worth inputting financially for that service.

Is the engine knocking severely indicating a bad main bearing? If so, a replacement used engine may be more economical than rebuilding the one you have.

Good luck on this repair.

Dec 18, 2010 | Honda Civic Cars & Trucks

2 Answers

What engine comes stock in a 1993 honda civic 4 door?


stock engine for that car is a 1.4 in line 4 cylinder with efi.

Mar 03, 2010 | 1993 Honda Civic 4 Door

1 Answer

Lower O2 sensor on a '98 Civic EX coupe.


it might be easier picking up a plug at a salvage yard then just connect to the correct colors,if you have four wires two should be black and two white,

Nov 24, 2009 | 1998 Honda Civic

1 Answer

My 95 honda civic coupe died on me then when i


put a nother battery in it. start the car. then be quick and while the car is running. remove the +(posotive) wire from the battery. if the car stays running you have a bad battery. if the car dies instantly, you need a new alternator.

Oct 23, 2009 | 1995 Honda Civic

1 Answer

Daigram of 1995 Honda Civic EX plug clutch pedal ?


95 civic coupe ex brake lights wont work and the shifter locks in park position, what's wrong?

Sep 09, 2009 | 1995 Honda Civic

1 Answer

95 honda civic ex squeals when starting engine


Some of the grime, etc on the engine prior to steam cleaning along with any solvents used may have affected the drive/fan belt. I would suggest you either check tightness of the belt and possibly consider replacing it.

Feb 28, 2009 | 1995 Honda Accord

Not finding what you are looking for?
1995 Honda Civic Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...