Question about 2001 Dodge Durango

1 Answer

WHAT HAPPENED WITH THE FAN SWITCH FOR THE A/C AND HEAT TO ONLY WORK IN THE HIGH POSITION. THE DASH FAN SWITCH HAS FOUR SETTINGS, LOW TO HIGH,, THE FAN ONLY WORKS ON HIGH,, DO I NEED TO REPLACE THE SWITCH OR IS IT A FUSE PROBLEM

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

It's the resistor pack. It's a common Dodge/Jeep issue. This is a circuit board under the passenger side dashboard, below the glovebox that has a couple of resistors (Stepping down the voltage from your battery to run at the lower speeds. High speed gets full voltage)
Dealership should have the replacement for $20 or less. Get the new one before you take the old one out so that you can see what it looks like, what to look for and how it goes in.
Removal is simple. You'll see a wiring harness that plugs into a socket that is held in place by 2 screws under the dash. Unplug the wiring harness from the connector. Remove the 2 screws and it'll drop right into your hands.
Installation is just as simple. Hold the new one in place and replace the 2 screws. Plug the wiring harness back in and you'll be good to go!

Posted on Nov 23, 2010

  • bu88a1974 Dec 09, 2010

    If I have helped you, please vote! Thanks :)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blower doesn't work w/heat setting


Some cars feed the high speed on dash fans thru the ignition switch. So it will only work at low speed for heat and AC..

Jul 01, 2016 | 2002 Kia Sportage

3 Answers

My low cool and low fan does not work. High cool and high fan works good. Is this something I can fix myself and if so, how?


If it is a Ford product the problem is with the ignition switch!!!!!!!!High cool function bypasses switch, Other speeds do not.
Your headlights might not be working either.

Jul 29, 2015 | Cars & Trucks

1 Answer

Blower fan not working.


Possible speed control is open circuit or the fan motor. Check you have supply to the switch/motor.

Apr 01, 2017 | 2006 Chevrolet Malibu LT

1 Answer

2006 Ford Mustang blower fan works on high only -


Need to change the switch that works high, medium, and low. It is a separate switch mounted usually behind the glove box or somewhere under the dash. Hope this helps, Mitchell.

Aug 18, 2012 | 2006 Ford Mustang

1 Answer

2000 ford expedition fan switch does not work on low position only works on high position. is it the switch or is there another control problem?


check resistor under dash by blower motor should be two screws holding it in or goto parts store and get new one and look under dash on passanger side

Nov 13, 2011 | 2000 Ford Expedition

1 Answer

Fan which blows heat doesn't work when toggle at dash board is moved to high.


When your fan switch is placed in the high position, it feeds directly to the fan motor and bypasses the blower motor relay. If the fan is operating on speed 1-3, then you have one of two things wrong, either you have a blown fuse, or the fan selector switch is faulty on the high setting.

Mar 29, 2011 | Geo Tracker Cars & Trucks

1 Answer

High/low sensor switch location for 1999 Buick Century


Ros.....The heater motor is located under the dash on the right hand side (passanger side). You will have to remove the close out panel to access. The resistor you are looking for will be to the lower left of the fan motor at about the 7:00 position. Illustration is below.
let me know.
regards,
0900c15280217dd1.gif

Feb 10, 2009 | 1999 Buick Century

1 Answer

Climate contrl fan


I had the same problem twice. The dealer said it was a recall for a bad fan control switch. It's located under the glovebox near the center of the dash and held in by two screws. Last time i had to replace the part was about 34.00 and did it myself. The cover under the glovebox pops out and you can see the part. They had problems with them burning out and only work on high after that happens.

Jan 20, 2009 | 1999 Oldsmobile Alero

2 Answers

Replacing heater blower motor


this is not a problem with thw switch or motor. There is a resistor that is mounted inside the dash on the pasenger side that controls the speed of the blwer..these have a tendency to burn up after 10 years or so... replace the resistor, and you will be fine!  http://cgi.ebay.com/ebaymotors/Toyota-Truck-A-C-Heater-Fan-Resistor_W0QQcmdZViewItemQQcategoryZ33548QQihZ016QQitemZ260344846266QQrdZ1QQsspagenameZWDVW#ht_500wt_1230

Dec 23, 2008 | 1984 Toyota Pickup Deluxe

Not finding what you are looking for?
2001 Dodge Durango Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

80668 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...