Question about 2002 Toyota Camry

1 Answer

I just had my car serviced at a garage and now my air conditioning doesn't work. They changed the oil/filter, transmission fluid/gasket, coolant drain/new coolant, and cabin/air conditioning filter. They stated I needed a new serpine belt so I told them to replace that. What could they have possibly messed up to cause the air conditioner to stop working (the light blinks when AC button is depressed)? Thanks for the help.

Posted by on

  • Anonymous Mar 25, 2014

    Ignition goes off when fuel tank is full.

    Air condition fan has stopped working.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,826 Answers

Maybe the refrigerant charge of r134a is low on pressure. Have that checked. I hope that the air conditioning tubing wasn't disturbed when all of that service was performed.

It really shouldn't have affected the a/c if they stayed away from that system.

Posted on Nov 05, 2010

Testimonial: "Thank you Duane! Your comments point in a direction I should investigate. Thank you!"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

B126 repair


Acura Service Codes

A: Replace Engine Oil
B: Replace Engine Oil and Filter. Inspect various systems and components

1: Rotate Tires and check tire pressure and condition
2: Replace air cleaner element, check drive belt and replace dust and pollen filter
3: Replace transmission fluid and transfer fluid (if equipped)
4: Replace spark plugs, replace timing belt (if equipped), inspect water pump, and inspect value clearance
5: Replace Engine Coolant
6: Replace rear differential fluid (if equipped)

Jun 26, 2014 | 2008 Acura Mdx

3 Answers

What is needed for a tune up?


Thanks for choosing FixYa and welcome. For a tune up, you would need to change spark plugs, coils, distributor cap, coil pack, and wires. You would change the air filter and the fuel filter also. Change your pcv valve as well. You can also change all your fluids and filters, such as oil, coolant fluid, and transmission fluid.

Apr 25, 2011 | 2000 Chevrolet Blazer

1 Answer

I have a 2008 dodge caliber with 65K miles and am moving cross country, about 2300 miles. what services should be performed on a caliber with this mileage.


oil change spark plugs air filter make sure brakes are in good condition also check transmission fluid and coolant good luck

Feb 07, 2011 | 2008 Dodge Caliber

1 Answer

I want to know a list of all the materials required to service my 1996 C180 for the best performance


engine oil MOBIL 1 5W-50 fully synthetic, engine oil filter must get from dealer genuine filter for it, if your car over 80.000 km must replace spark plugs and fuel filter, if your car over 65.000 km or after last transmission service have driven another 65.000 km it's due for transmission now, transmission filter oil and oil pan gasket must get from dealer, may be need for air filter and pollen filter, it's depend on condition of filters, must check wheel bearings and brake pads and brake disc, and also be need brake fluid, if brake fluid older than two years, and normal basic check,

Oct 20, 2010 | 1996 Mercedes-Benz C-Class

2 Answers

How often should I change the Transmission fluid, normal driving ? Thank you Gary


It's listed in your owner's manual. Schedule A is normal driving conditions.
SCHEDULE "A"
7,500 miles (12 000km) or at 6 months
- Change engine oil.
- Replace engine oil filter.

15,000 miles (24 000km) or at 12 months
- Change engine oil.
- Replace engine oil filter.

22,500 miles (36 000km) or at 18 months
- Change engine oil.
- Replace engine oil filter.
- Inspect front wheel bearings.
- Inspect brake linings.

30,000 miles (48 000km) or at 24 months
- Change engine oil.
- Replace engine oil filter.
- Replace engine air cleaner filter.
- Replace spark plugs.
- Drain and refill automatic transmission fluid and filter (4.7L).

37,500 miles (60 000km) or at 30 months
- Change engine oil.
- Replace engine oil filter.
- Drain and refill automatic transmission fluid and filter (5.2L/5.9L).
- Drain and refill transfer case fluid.

45,000 miles (72 000km) or at 36 months
- Change engine oil.
- Replace engine oil filter.
- Inspect front wheel bearings.
- Inspect brake linings.
- Flush and replace engine coolant at 36 months, regardless of mileage.

52,500 miles (84 000km) or at 42 months
- Change engine oil.
- Replace engine oil filter.
- Flush and replace engine coolant if not done at 46 months.

60,000 miles (96 000km) or at 48 months
- Change engine oil.
- Replace engine oil filter.
- Replace engine air cleaner filter.
- Replace ignition cables (5.2L/5.9L).
- Inspect PCV valve, replace as necessary.
- Replace spark plugs.
- Inspect auto tension drive belt and replace as necessary (5.2L/5.9L).
- Drain and refill automatic transmission fluid (4.7L).

67,500 miles (108 000km) or at 54 months
- Change engine oil.
- Replace engine oil filter.
- Inspect front wheel bearings.
- Inspect brake linings.

75,000 miles (120 000km) or at 60 months
- Change engine oil.
- Replace engine oil filter.
- Drain and refill automatic transmission fluid and filter (5.2L/5.9L).
- Drain and refill transfer case.
- Flush and replace engine coolant if it has been 30,000miles (48 000km) or 24 months since last change.
- Inspect auto tension drive belt and replace if required.

82,500 miles (132 000km) or at 66 months
- Change engine oil.
- Replace engine oil filter.
- Flush and replace engine coolant if it has been 30,000miles (48 000km) or 24 months since last change.

90,000 miles (144 000km) or at 72 months
- Change engine oil.
- Replace engine oil filter.
- Replace engine air cleaner filter.
- Replace spark plugs.
- Inspect front wheel bearings.
- Inspect brake linings.
- Inspect auto tension drive belt and replace as necessary.
- Drain and refill automatic transmission fluid (4.7L).

97,500 miles (156 000km) or at 78 months
- Change engine oil.
- Replace engine oil filter.

105,000 miles (168 000km) or at 84 months
- Change engine oil.
- Replace engine oil filter.
- Flush and replace engine coolant if it has been 30,000 miles (48 000km) or 24 months since last change.
- Inspect auto tension drive belt and replace if required.

112,500 miles (181 000km) or at 90 months
- Change engine oil.
- Replace engine oil filter.
- Drain and refill automatic transmission fluid and filter (5.2L/5.9L).
- Inspect front wheel bearings.
- Inspect brake linings.
- Flush and replace engine coolant if it has been 30,000 miles (48 000km) or 24 months since last change.

120,000 miles (192 000km) or at 96 months
- Change engine oil.
- Replace engine oil filter.
- Replace engine air cleaner filter.
- Replace ignition cables (5.2L/5.9L).
- Inspect PCV valve, replace as necessary.
- Replace spark plugs.
- Inspect auto tension drive belt and replace as necessary.
- Drain and refill automatic transmission fluid (4.7L).

Thanks for using FixYa -a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 05, 2010 | 2001 Dodge Durango

1 Answer

2004 honda accord auto. what must be done for 215000km service.just bought car. what about gearbox oil


Spark plugs and wires, coolant flush, transmission fluid, check the brakes, check belts, oil change,check coolant hoses, check air filter and cabin air filter

Apr 08, 2010 | 2004 Honda Accord

1 Answer

Need to change the transmission filter how and where is it located


Fluid & Filter Change Under normal service (moderate highway driving excluding excessive hot or cold conditions), the manufacturer feels that automatic transmission fluid should not need periodic changing. However, if a major service is performed to the transmission, if transmission fluid becomes burnt or discolored through severe usage or if the vehicle is subjected to constant stop-and-go driving in hot weather, trailer towing, long periods of highway use at high speeds, fluid should be changed to prevent transmission damage. A preventive maintenance change is therefore recommended for most vehicles at least every 90,000 miles (145,000 km).
Although not a required service, transmission fluid changing can help assure a trouble-free transmission. Likewise, changing the transmission filter at this time is also added insurance.
  1. Raise the car and support it securely on jackstands.
The torque converters on some transmissions are equipped with drain plugs. Because it may take some time to drain the fluid from the converter, you may wish to follow that procedure at this time, then come back to the pan and filter removal.

980822b.gif
Before removing the transmission fluid pan, insure that the area is clean of dirt and debris

2. Place a large drain pan under the transmission.

378093c.gif
Loosen all of the pan attaching bolts to within a few turns of complete removal


  1. Loosen all of the pan attaching bolts to within a few turns of complete removal, then carefully break the gasket seal allowing most of the fluid to drain over the edge of the pan.
CAUTION DO NOT force the pan while breaking the gasket seal. DO NOT allow the pan flange to become bent or otherwise damaged.

  1. When fluid has drained to the level of the pan flange, remove the pan bolts and carefully lower the pan doing your best to drain the rest of the fluid into the drain pan.ea833e6.gif


Once the pan is removed, discard the old gasket and insure that the mating surfaces are clean

9aa0aea.gif
Inspect this magnet inside of the pan for any large pieces of debris. A light gray coating is normal

11c6ddb.gif
Clean the pan thoroughly with a safe solvent and allow it to air dry

5. Clean the transmission oil pan thoroughly using a safe solvent, then allow it to air dry. DO NOT use a cloth to dry the pan which might leave behind bits of lint. Discard the old pan gasket.

22d9261.gif
The transmission filter is secured by a mounting bolt (arrow). Some models may use two bolts

097949a.gif
Remove the filter mounting bolt ...


d9f5189.gif
... then pull the filter free from the transmission

6. If necessary, remove the Automatic Transmission Fluid (ATF) filter mounting bolts, then remove the filter by pulling it down and off of the valve body. Make sure any gaskets or seals are removed with the old filter. The transmission usually has one round seal and a rectangular gasket.

7. Install the new oil filter screen making sure all gaskets or seals are in place, then secure using the retaining screws, if applicable.

50f9d74.gif
Install a new pan gasket


8. Place a new gasket on the fluid pan, then install the pan to the transmission. Tighten the attaching bolts to 71-119 inch lbs. (8-13 Nm).

34bd906.gif
Fill the transmission with the proper amount of ATF

9. Add three quarts (six quarts if the torque converter was drained) of fluid to the transmission through the filler tube.
10. Remove the jackstands and carefully lower the vehicle.
11. Start the engine and move the gear selector through all gears in the shift pattern. Allow the engine to reach normal operating temperature.
12. Check the transmission fluid level. Add fluid, as necessary, to obtain the correct level.

Nov 19, 2009 | 1997 Ford Explorer AWD

1 Answer

How do I change the tranny fluid in my 1998 cadillac catera


Fluid - A/T: Service and Repair
Transmission Fluid and Oil Filter Changing
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lift Points.
2. Place drain pan under pan
3. Remove oil pan bolts from front and sides only.
4. Loosen the rear oil pan bolts approximately four turns.
5. Lightly tap the oil pan with a rubber mallet or pry to drain the fluid from main case.
6. Remove the oil pan bolts from rear oil pan and gasket.
7. Remove front oil pan bolts leaving one corner bolt in loosely.
8. Lightly tap oil pan with rubber mallet or pry to drain fluid.
9. Remove the following remaining components:
^ The front oil pan bolts
^ The oil pan
^ The gasket
10. Remove the oil filter bolts and filter.
11. Clean the following components:
^ The transmission case
^ The front adapter case
^ The oil pan gasket surfaces with solvent
^ Air dry
^ All traces of gasket material must be removed
INSTALLATION PROCEDURE
1. Install the gasket.
2. Install the oil filter.
3. Install the bolts.
^ Tighten the transmission oil filter bolts to 20 Nm (15 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the front oil pan.
5. Install the front oil pan gasket
6. Install the front oil pan bolts
^ Tighten the front oil pan bolts to 11 Nm (96 inch lbs.).
7. Install the following components:
^ Install the pan
^ Install the gasket
^ Install the bolts
^ Tighten the oil pan bolts to 11 Nm (96 inch lbs.).
8. Refill the transmission with DEXRON III through oil pan fill plug on the side of the (main case) oil pan. Fill the transmission to lower edge of oil
pan fill. Fill plug opening using and oil suction gun.
^ Tighten the oil pan fill plug to 45 Nm (33 ft. lbs.).
9. Lower the vehicle.
10. Check the transmission fluid level. Refer to Transmission Fluid Checking Procedure.

Sep 13, 2009 | 1998 Cadillac Catera

4 Answers

Engine oil dipstick shows water and rust mixed in with oil


Everyone always jumps to head gaskets. There are plenty of MINOR things that can be looked at first.
The Volvo 2.3, 2.4, 2.5 Inline 5 Cylinder dipstick tube is known to develop a large amount of condensationin winter months and stop and go driving. What you see on your dip stick is possibly just condensation. Take off your oil cap and look under the cap and inside the valve cover. Is there any thick foamy oatmeal like substance or noticeable amounts of water? If your oil was saturated with coolant, you would be able to see it up there too. Check your coolant for oil. Volvo coolant is typically brown to orange, however make sure there is no sludge. Start the car with the cap off and keep an eye out for alot of bubbles. A large amount of bubbles is a sign of a bad head gasket. A couple here and there is just air in your cooling system.
Coolant, Transmission fluid, and Oil have several places they can mix. If you have a turbocharged Volvo, the seals in the turbo can go bad and cause a mix of oil and coolant. Your transmission cooler is also in your radiator, and if it cracks your transmission fluid and coolant can mix. I believe turbo models have an oil cooler built into the radiator as well.
Overall if your car sounds fine, you dont see oatmeal, your not using coolant and oil in excessive amounts, dont have white smoke, and your turbo isnt whining you probably just have condensation in your dip stick. If you are overly concerned you can send a sample of your oil to a lab and have it tested for traces of coolant. Headgaskets rarely fail on Volvo's, even the old ones....I have seen many that have gone to replace them have not found a failed gasket and end up finding a bad transmission cooler or a bad turbo.

May 09, 2009 | 1999 Volvo S70

Not finding what you are looking for?
2002 Toyota Camry Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...