Question about 1998 Chrysler Concorde

1 Answer

Car wont start.

Hi, Last Saturday my 98 Concorde developed some problem. The car was running but the AC and radio would not turn on and my windows would not roll down. I then noticed that on the dash the ABS, Airbag, Oil and TRAC ON lights were on. The car though was running just fine. Later that evening and for five days the car has been running good no lights showing and everything in good order. Yesterday the same problem came up where I had all the above lights and windows not rolling down but by the time I drove home the car was fine again. Now this Friday morning the wife took the car to work and all was fine but when it was time to get off work the car would not even start, wouldn't crank at all and the alarm just kept going off ata any small thing ...touch the car the alarm goes off, close the door the alarm goes off..Has anybody come acrose this particular problem any and all help are most welcomed.

Posted by on

  • jimmyd682 Sep 10, 2008

    I'm having exactly the same problem you described. Not wanting to start, windows not working, ac not working, all happening randomly. I would like to know did the BCM fix your problems?




1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I work at a car lot and have experienced alot of numerous electrical problems with this group of Chrysler's.(Intepid, 300m, LHS, Concorde) I hate to say but usually a BCM has fixed my problems. Regarding the alarm i would look into the switch on the back side of the lock cylinder it was a very common problem in the mid 90's era Chryslers, but all in all sounds almost like a BCM. (Body Contol Module) New they are salty but call the dealer and give them the last eight of the vin and tell them you need the ID number for the bcm they should give it to you then browse your local junk yards. GOOD LUCK!

Posted on Jun 17, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

All acc quit at one time no ac power windows radio ans on car runs

You may have a faulty BCM (body control module) it is what turns on all the accessories when you press the switches. I don't know of any other part that could cause all of these systems to stop working. I assume you have checked all the related fuses, both in the car and under the hood.

Aug 12, 2016 | 1994 Chrysler Concorde

2 Answers

I changed the oil in my 98 concorde and now it wont start. The oil light is on but not the check engine light.\

do you here the fuel pump working when you turn the key?If not could be a fuse that runs the fuel pump.

Aug 05, 2012 | 1998 Chrysler Concorde

2 Answers

2001 Chrysler concorde 2.7 car wont but turns over. If I disconnect the cam sensor the car will start. ????

No. The 2.7 is noted for having the timing belt break. It will roll over but not start. Must replace timing belt.

Feb 29, 2012 | 2001 Chrysler Concorde

2 Answers

I had my oil changed last Saturday and the car didn't have oil in tuesday u put 2 quarts in and saturday no oil what's going on?

Hi, obviously you have a major oil leak, if it was'nt leaking before the oil change, I would say the oil pan bolt wasnt tightened right or they stripped it out, or the oil filter isnt tight or they left old gasket/o-ring on the oil filter mount causing the leak. I would take it back to where you got the oil changed and demand they fix the issue (free of course)....Mike

Jun 20, 2011 | 1999 Chrysler Concorde

1 Answer

Gauges stop working and then car will not start

check the ignition swich, may have some bad contacts, try to move it around with the key in it if the gauges go on ,this could be the problem. I had this happen to my car.
check the fuses,. make sure your battery is good.

Feb 03, 2009 | 1998 Chrysler Concorde

1 Answer

Car alarm preventing car from starting

1999 CONCORDE: check the battery terminals probably they are not tight enough...something like that happened to me just the lights turned on and the car seemed to be dead, the battery is still ok since then. I just needed to buy new terminals.

Sep 20, 2008 | 1999 Chrysler Concorde

Not finding what you are looking for?
1998 Chrysler Concorde Logo

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides