Question about 2006 Chevrolet Cobalt

2 Answers

P.O.S car

I have 88,000 miles on this car nothing but problems now i have a check engine light on that reads as a faulty ecm where is this located and is it fixable im debating on driving it into a tree im am a wicked chevy fan but i f***** hate this car with a passion ive put 3 front bearings, both lower control arm bushings, both link pins a outer tie rod, the door lock on the back door, back seat realese lever broke, and the front struts where blown right out, and those 100,000 mile spark plugs i had to change them and they had like no electrode left my advice "DONT BUY A COBALT THEY ARE JUNK"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tell me how to fix power steering on a 2006 chevy cobalt electric motor type, can anyone tell me how to fix it myself?

Posted on Jul 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I have a cobalt too. I have been researching the hell out of these cars. I am not impressed. Too many problems at very little kilometers. I was wondering how bad it gets at 88,000 kilo.Your lucky you got that far.These are the problems I come up with.
Faulty electric power steering
Faulty ignition problems
Faulty steering shafts and components
faulty stabilizer mounts
Numerous electrical problems
Poor gas milage
FaultyFuel injector rail( no more room to write)

Posted on Jul 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dakota 2004 engine light wont go off but engine fine


engine light also reports on transmission faults
have the fault codes read again and if nothing is reported reset the ECM using a scan tool

Nov 19, 2015 | Dodge Dakota Cars & Trucks

1 Answer

How do you turn off the airbag warning light on a peugeot parter hdi escapade 2003 88,000 miles


You will need to get the fault codes read first, a common problem is the wiring/connectors under the front seats. The fault code reading will help point you in the right direction. When the light is on the airbag will not work in an accident.

Jun 01, 2011 | Peugeot 405 Cars & Trucks

1 Answer

Check engine light is on again. After driving another 500 miles. the car was services and the found a leak on top of tank. They told me they replaced some cracked cap on top of gas tank. light was off for...


Must be cap is loose again or the cap was not fitted properly and so the check engine light is coming ON again.But if the light is ON again that means the ECM has stored error codes in it.The ECM means Electronic control module,also called cars computer.Get your car scanned at diagnostic scan center,.There you can get the exact error codes for the check engine light coming ON.At www.autozone.com its absolutely free to get car scanned.There you can get the codes for free.As per error codes you can replace the faulty part.-------------- This will help.Thanks.Helpmech.

Jan 20, 2011 | 2006 Porsche Cayman S

1 Answer

How to change spark plug on 2006 cadillac DTS. My chech engine light is on, will this fix the problem. 88,000 miles


The plugs are located by engine head. You can use a ratchet wrench and sockets to remove them. Make sure to mark the plug wires so the order doesn't get mixed up.
The check engine light comes on when there is a bad sensor, or bad circuit.
Many part stores will run an engine diagnostic code scan for free which will pinpoint exact problem that is setting of the check engine light
The light can only be shut off by the diagnostic scanner!!

Nov 23, 2009 | 2006 Cadillac DTS

1 Answer

Bad idle, no takeoff


Was the replacement MAP sensor new original or aftermarket, or used maybe? How is the reading of the O2 sensor? STFT and LTFT at idle and driving? Try testing the EGR or just plug the EGR port and try it if any improvement. It is asking for serious diagnostic work.

Oct 12, 2009 | 1998 Mazda Protege

1 Answer

My check engine light came on and it was P0551


it is a small sensor on pump just need a ratchet and socket it is a one wire sensor like old oil pressur sensors just tug wire it will come off

Jul 21, 2009 | 2001 Chrysler PT Cruiser

3 Answers

2002 BMW 530i service engine light on


It could be any number of things you will nee the codes read to be sure. If yor mileage is near one of the recommended services points 50,000, 100,000 or 150,000 this could be the cause. Again you won't know or sure ill codes are read Good Luck With This

Jul 09, 2009 | 2002 BMW 5 Series

2 Answers

My check engine light came on


Take it to autozone and get a free dianostic check with a scan tool. The code will point you in the right direction to diagnos the problem.

Jun 05, 2009 | 2003 Chevrolet Monte Carlo

2 Answers

2001 Hyundai Santa Fe 78K miles on it...purchased 8/04 began having problems 10/08. Car starts no problem. After sriving for 10 minutes when coming to a stop the car feels like it does not want to stop,...


TRY THESE TWO (2) THINGS..
Step 1: Disconnect the battery cables and touch them together for 30 seconds (this ZERO'S out the PCM/ECM (Power Train Control Module/Engine Control Module). If there's GARBAGE in memory of this computer (PCM/ECM), this should CLEAR it.
Step 2: Check the Throttle Position Sensor (TPS, it's a potentiometer) for any ERRATIC resistance changes at idle position or any other position for that matter. If you find, what I call BAD SPOTS, in the TPS, replace it. I know of NOTHING ELSE which would cause the problem you describe and NOT turn on the "Check Engine" light

May 03, 2009 | 2001 Hyundai Santa Fe

Not finding what you are looking for?
2006 Chevrolet Cobalt Logo

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...