Question about 2000 Buick Century
How do you get to this filter?
I want to replace this filter.
Simple, you don't! Remove the passenger's side front tire and there is a little door from which you access the battery.
Actually, you do need to remove it. You can't access the terminal posts or the tie-down bracket from the access door. The good news is the process is straightforward, and you don't need to remove the tire.
First, turn the steering wheel all the way to the right. From here you can remove the six screws holding in the battery access panel.
Next, open the hood, unclip the air filter housing and remove the filter. It helps to get the cover up and out of the way by using a spare piece of wire and attaching it to the hood.
Now, you're ready to remove the air filter housing. On the right side of the housing (facing the car) you'll notice a fastener with no apparent means of removal. This is a friction grommet, akin to the snaps on a baby's shirt. Grip the housing right above this fastener and give it a firm pull upwards. The housing should pop out over the fastener. The left side is not fastened - there are two "bumpers" that hold it in place on that side.
Now you have complete access to the battery and can proceed with the replacement, sliding the battery out through the access door once it's been disconnected.
Finally, it's much easier to re-install the battery access door from the top, before re-installing the air filter housing. It's possible, but not easy from down below.
Posted on Jul 03, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The coolant level sensor is located on the radiator. If you are looking at the engine from the front of the car it will be on the left side. There will some kind of clip holding it in the radiator. Removed the clip and pull the sensor out. You will lose coolant so try to swap it out quick or drain some of the coolant out. Once new sensor is installed, install clip to keep the sensor in place and reconnect the wires to the sensor. Crank the engine and make sure the coolant level is full. This should correct your problem.
Posted on Jan 04, 2009
Tips for a great answer:
Jan 29, 2016 | 2000 Buick Century
on May 01, 2012 | 2000 Buick LeSabre
Jul 23, 2014 | 2000 Buick Century
Mar 10, 2010 | 2000 Buick Century
Dec 27, 2009 | 2000 Buick Century
Nov 10, 2009 | 1999 Buick Century
Sep 30, 2009 | 2000 Buick Century
Jul 01, 2009 | 2000 Buick Century
Jun 21, 2009 | 1999 Buick Century
Jul 06, 2008 | 2000 Buick Century
1,063 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: