Question about 2003 Chevrolet Venture Passanger
You certainly aren't the first one to have security issues with these things. Your best bet is to just bypass the system. I'm pretty sure you have Passkey III. If your key has PK III on it, that would confirm. Here are some youtube videos showing you how to do it. https://www.youtube.com/results?search_query=2003+chevy+venture+passkey+III+bypass
Posted on Jul 23, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
had the same problem with my ford a few years back, found that the rubber seal on the piston in the compressor had run dry and it was too hard for the compressor to push the piston up and down the bore which cut the power to the compressor and you had to stop the car turn it off for a couple of minutes and restart it and the compressor would pump air for another couple of minutes and stop again.
I solved the problem by replacing the shocks with a pair of pump up shocks that have a valve like a tyre valve and you pump them up at the service station
hope this helps
Posted on May 25, 2009
The motor is shot. It works a little and overheats, replace the motor . Same thing the the lock acuators. The are trying but have lost the power to move the locks. May as well replace them while the door is apart.
Posted on Aug 16, 2009
I recently repaired a similar problem for a friend of mine. I posted the procedure on our website. Here's the link:
Posted on Sep 20, 2009
check the system fuse and or circuit breaker. check the switch wires for damage and loose connections. check the switches for continuity. remove the door panel(s) and check the actuator wiring connections to see if they're loose or damaged. inspect the actuator rods if equipped to make sure they arn't bent or damaged or loose connections. the actuator can ce momentarily. a discernible click indicates that the solenoid is operating properly.
Posted on Nov 17, 2009
It sounds like you've got a broken wire on the drivers side door. Usually this occurs at the flex point of the wiring harness. Peel back the outer covering carefully exposing the wires inside. Repair any broken or those about to break. Solder & retape or shrink rap with heat gun.Hope this helps. Good luck!
Posted on Nov 24, 2009
Tips for a great answer:
Jan 19, 2016 | 2003 Chevrolet Venture
Jul 20, 2014 | 2003 Chevrolet Venture Passanger
Mar 01, 2013 | 2003 Chevrolet Venture Passanger
Sep 30, 2012 | 2003 Chevrolet Venture Passanger
Mar 03, 2010 | 1999 Chevrolet Venture
Jul 17, 2009 | 2003 Chevrolet Venture Passanger
May 31, 2009 | 2001 Chevrolet Venture
111 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: