Question about 2000 Chevrolet Blazer

1 Answer

Where is the thermistat? - 2000 Chevrolet Blazer

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,871 Answers

Hello! Remove air cleaner outlet duct...Remove throttle body bracket nuts and reposition bracket...

where is the thermistat? - saailer.gif

Remove water outlet housing mounting bolts and remove housing...Remove thermostat...



I’m happy to help further over the phone at

Posted on Nov 04, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Car overheating

Need to replace thermistat housing gasket. It's a dealer part which cost about $166.00 a well as the 3 peice thermistat

May 16, 2012 | 2004 Lincoln LS

1 Answer

Not getting any heat. just replaced thermostat and water pump. still nothing. upper hose gets hot lower radiator hose cold?

it sounds like the thermistat was instald back words. are thare is a air bubble thare try berping the sistem the hights heater hose if that dos not help check thermistat once in a blue moon thay do fail

Jan 20, 2011 | Jeep Cherokee Cars & Trucks

2 Answers

Hello, Can you help me? I have a 1993 Chevy Lumina that is overheating when I stop ex. long traffic lights, letting it run while I go to the mac machine etc... once I start driving again its fine. Can you...

Sounds like the cooling fan is not coming on .. could be a bad fan motor or relay .. If you can check it yourself you can try to power the fan up directly and see if that is the problem.

Jul 29, 2010 | 1993 Chevrolet Lumina

1 Answer

Where is the thermostat cant find a repair manual for 97 Sportage ..need to know where the thermostat is located

just follow the top radiator hose toward the engine. that metal housing that the radiator hose hooks up to has the thermistat under it take off the two bolts and change out thermistat.refill with coolant then run for about a half hour to warm up enough to open thermistat, then top off with coolant at the radiator cap.leave cap loose during this operation so that no pressure will build up in radiator.if unsure squeeze upper rad. hose it should easilly compress if stiff pressure has built up so dont open the cap. let cool then top up coolant

Apr 01, 2010 | 1997 Kia Sportage

1 Answer

Car runs hot after repairing, water pump, themostat, water outlet, coolant flush. What else can cause the thermostat gauge to move?

[1] plugged radiator core. replace radiator,not cleanable
[2] a bunch of dead bugs stuck on air conditioner condenser in front of radiator. open hood and look at front of it if a bunch of debris blast it off with water hose
[3] the air not properly bled from the engine cooling system. some have a bleeder screw that must be opened while engine running untill all air is let out if i dont have a screw for bleeding then you have to let engine run long enough to open thermistat i may take a while when radiator tank feels hot then thermistat is open. coolant level should have dropped top off and put cap on
[4] electric cooling fan not working

Mar 22, 2010 | 2005 Dodge Magnum

1 Answer

I broke one of the bolts to the thermistat housing, tried to drill it out and screw out with an extractor, but unsuccessful, any ideas? What is the larger part that the thermistat housing bolts on to, I...

True using extractors is sometimes more complicated than bringning it to the machine shop, but the most logical since there is no drill press at hand. But you do not need to retap, just tell the machinist to remove the bolt and use an insert with inside and outside thread already so the casing will not be damage.

Nov 29, 2009 | 1994 Toyota Pickup

1 Answer

1985 Volvo 244 Air Conditiong Blows fuse when turned on. Can't find wiring diagram for this section to check wiring. Any solutions to this problem?

You say blows fuse,
Are you talking about the Blower Fan, or the Thermistat for the Compressor.
If it is the Blower Fan It may be seized as the Blower Fan motor doesn't have bearings it has a bronze bush & may be stuck. I had this fault on my 76 244DL.
I had to dismantle the whole dash pull the Blower Fan apart re grease the bush & give it a clean & re assemble. It took me allll day to pull the dash apart fix the Blower Fan motor & reasemble It works perfect now like new.

If it is the Thermistat disconnct the wire to the compressor & try a jumper wire to the compressor to see if the compressor operates. if ok it could be a damaged wire through the firewall shorting somewhere. You will have to buzz out the wires from thermistat down to the compressor & the throttle up solonoid.

Jul 03, 2008 | 1984 Volvo 240 Series

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

83772 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides