Question about 1995 Nissan Pickup

Open Question

My 95 nissan pickup was running fine and then I pulled up to a stop sign and it died. I opened the hood and moved the wire loom heard a click sound and it started right up i drove home and now it wont start again ive checked the fuses, grounds, battery, and looked for loose wires. Is there a inline fuse? i cant find a wiring diagram any suggestions would help.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
michaelcanto
  • 76 Answers

SOURCE: Flickering tail light and dash lights; 1995 Nissan pickup

Like all imports wiring was marginal and prone to failure. Check and clean all ground wires. Especially the one that connects the bed to the chassis. If one is not present, install one. Also remove the taillights and clean the contacts, then add a die-electric grease to prevent additional corrosion. Go to the local autoparts store or good central library for additional information on your truck.

Posted on Jul 25, 2009

Ad
morse008
  • 1111 Answers

SOURCE: location of the ac inline fuse link for a 1997

the link is a black like thing that is between the two this is why it it called a fusable link well just follow the lime from the a/c down the wire to it and that s it

Posted on Aug 26, 2009

NismoMaster
  • 146 Answers

SOURCE: 2001 nissan altima dash lights

Nissan does not use inline fuse. You are looking for fuse number 34 (red 10 amp fuse). It is located under the hood between the engine and battery. Possibly marked "ILL"

Posted on Sep 07, 2009

carsandcomps
  • 722 Answers

SOURCE: i have a 95 nissan pickup it runs fine but has no

mfoster93,

Answer these questions to determine power loss while driving:

1. Do you hear any pinging or knocking? A bent rod will cause loss of power. ( should be able to hear wihtout strain)

2. Have you changed the fuel filter/airl filter recently? A plugged (dirty) fuel filter will cause this, as well as a plugged (dirty) air filter. Change both if needed.

3. Injected? On a full tank run one can of SeaFoam in the tank - first, pull vacuum lines and run through lines for about 20 seconds (will have to put hose in can, and manually rev the engine to keep from dying). Pour rest of contents into tank (full tank) and drive.

4. If you use Pemium fuel, use up what you can (if possible) and switch to regular (or vise versa). Some vehicles don't run well, if at all with Premium fuel.

5. Upon changing fuel filter, make sure all air lines, fuel lines and vacuum lines are not kinked, or have holes in them.

6. If none of the above make a difference, start the truck and locate the MAS (mass air flow sensor) which is between the intake and the air filter. (black); lightly tap on the top of the MAS with a screwdriver handle or a wrench. If the truck stalls (hesitates, stutters) or dies, then it needs replaced. Before replacing however, go to the local parts dealer and purchase a can of MAS cleaner. It is safe for sensors and will clean the sensor inside (honey come inside like a catalytic converter).

Sometimes the MAS is dirty and the sensor isn't able to read the air intake causing it to mix the air and fuel incorrectly. This is a cheap and affective fix for the problem you're having.

If this does not work, try first options above, and this should cure the issue. If not, you may have a timing issue. If you have access to, or own a timing light, use it to determie timing placement is correct. Also, make sure that two of the spark plug wires have not been misplaced. Though it idles fine it will not make too much of a difference at idle but will while driving. I've experienced this first and, and thus I mention it.

Please let me know if you need any further assistance. Here is a tip to get you started. Check with your local parts dealer and find out what the cheapest fix is, and work your way up. 99% of the time it's the simplist components that cause the biggest issues.

Cordially,

carsandcomps
Guru, Premium Expert @ Fixya

Posted on Apr 10, 2010

  • 1 Answer

SOURCE: 2001 nissan maxima se keeps blowing the ecm 1 fuse

Did you find the prolbem? Im having the exact same problem you have. Mine is doing it after it died and I replaced the starter but now it wont start and the fuse eng cont 1 keeps getting burned out instantly

Posted on Aug 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was driving down the road the hood to my 2003 Nissan xterra flew up. My windshield wipers stopped working and its hard to open my hood. How do I pull the hood back forward?


There is 2 bolts on each hood hing loosen them and move the hood. As far as the wipers it sounds like the wiper linkage got bent.

Sep 24, 2017 | Nissan Cars & Trucks

1 Answer

Why doesnt 1993 nissan 240sx. stay running right. I think the thermostat didn't open and blew a hose. Now when I start it it runs fine, but gets warmed up and loses power and won't run and dies.Could


proabably thermostat if you changed thermostat and still have problem it could be defective ive heard of a dodge pickup having same problem loses power when heated up it was plugged catalatic converter.

Sep 02, 2014 | 1993 Nissan 240SX

1 Answer

My 1998 200sx stopped accelerating while getting on freeway.


Could be the cable that actavates the throttle plate on the intake..
The cable comes from the gas pedel and pulls on the throttle plane in the intake manifold.. opening the plate to let air flow through to the engine. On the other side from the cable is a plastic sensor with wires attached to it this is the Throttle position sensor.. if this is disconnected or broken the computer cannot receive the single that you are pushing on the gas pedel.. very rare for the throttle position sensor to break completly.. best posibility broken cable.. open hood find cable connected to throttle body, have someone in car push pedel see if it moves. Good luck.

May 11, 2014 | 1988 Nissan 200SX

1 Answer

Keeps dying


plugs wires ? spark combustion vacume

Aug 08, 2013 | Nissan Altima Cars & Trucks

1 Answer

4wd shifter stuck in position and truck wont move


Take the transfer case apart and find out what is broke.

Jun 17, 2017 | 1986 Toyota Pickup 4WD

1 Answer

When idleing at a complete stop it dies


Check air cleaner. put some Lucas injector cleaner in the gas tank or a product called mystery oil. Also at night with all the lights off open the hood and watch to see if their is any sparking between spark plug wires.

Feb 23, 2013 | 1999 Ford Ranger SuperCab

1 Answer

91 nissan will not engage starter when ignition is turned


It could be that relay, or a dead spot on the starter.
Can you jumper the starter and make it crank ?

Jan 17, 2013 | 1991 Nissan Pickup

1 Answer

`91 Nissan D21 4 cyl MT Pickup won't idle when cold


sounds like the clutch isnt engaging properly in the situations you described. may need to check fluid levels if there ok. then may need to get serviced or checked at least

Mar 20, 2009 | 1991 Nissan Pickup

Not finding what you are looking for?
1995 Nissan Pickup Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...