Question about 2004 Chrysler Sebring

1 Answer

Turn signals and hazard flashers quit working

Trying to find the right relay switch to checkout in steering column.checked fuses and they look good steering column is apart as i'm writng this.please can anyone help as soon as possible. Thanks! rvitul420@aol.com

Posted by on

  • Anonymous Aug 19, 2008

    i do know that there is a 7 blade flasher located in the drivers side wall in the trunk on a 1996 sebring convertible















×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

There are two possible locations for the relay.

First in the fuse panel, close to the bottom.

Second, in some models they put the darn thing behind the dash in the center of the car, it's a real pain to get to if it's that one.

Good luck

Posted on Aug 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I locate the turn signal flasher.


Use same flasher problem is either fuse or switch

May 03, 2015 | Cars & Trucks

2 Answers

I have a 1995 grand prix Blinkers dont work but, other lights do.


First check turn signal fuse and relay if, they are good then try pressing on and off the hazard switch while turning the signal switch on.If signals start to work replace hazard switch.If hazard switch is good then replace turn signal switch.

May 02, 2011 | 1995 Pontiac Grand Prix

1 Answer

Where is the turn signal relay, hazard relay, and flasher for a 2003 Ford F150? My turn signals do not work (inside or outside), but 3 out of 4 outside lights work when the hazards are on, but with only 1...


It is not the flasher if the hazards work, it is 1 flasher for both turn signals and the hazard lamps. It is in a relay block ( along with the blower motor relay ) under the dash, about in line with the steering wheel column ).

Try tilting the steering wheel all the way up, and test again.

The other quick test is to cycle the hazard switch a few times, to see if it cleans the contacts for the turn signal on the MFS,

Apr 01, 2010 | 2003 Ford F150 Regular Cab

2 Answers

1993 Dodge Shadow...left turn signal won't flash


If the fuses are good and the front and rear bulbs are good, change the flasher for the turn signals, even tho the right is working. If that doesn't fix the problem, it might be in the turn sgnal switch on the steering column.
If both bulbs are good for the backup lights and fuses are good, then the backup light switch, which is screwed into the side of the transmission has to bad.

Apr 12, 2009 | 1993 Dodge Shadow

2 Answers

Turn signals don't work


i have a similar problem but my left signal works, when i turn the right on it just does an annoying buzz sound. if you can think of any explination for such shinanogins help would be greatly appreciated

Nov 25, 2008 | 1989 GMC K1500

1 Answer

Turn signals and hazard flashers quit working


it is a simple problem....just replace the hazard switch and everything will be back to normal

Nov 02, 2008 | 2006 Chrysler Sebring

2 Answers

Hazard Flashers, turn signals and brake lights quit working


please check your flasher relay. it is normally a three prong relay box.


tnx 4 using fixya,

drcool

Sep 02, 2008 | 1996 Lincoln Town Car

3 Answers

Turning signal and 4-way hazard flasher not working


the actual hazard lights switch is also a relay and linked to signals left/right try checking this out ?

Aug 30, 2008 | 2000 Toyota Sienna

Not finding what you are looking for?
2004 Chrysler Sebring Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...