Question about 1989 Oldsmobile Ninety Eight

1 Answer

Remove steering wheel

How do I remove a 1989 oldsmoble touring sedan steering wheel

Posted by on

  • Anonymous Feb 08, 2009

    I HAVE THE SAME PROBLEM i NEED TO REMOVE THE tILT WHEEL PINS SO THE TILT WHEEL CAN BE MOVED TO TIGHTEN THE 4 BOLTS

  • Anonymous Mar 23, 2014

    I can barely move the steering wheel and it is all over the road...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First there are 2 screws behind the steering wheel they are hex or phillips
take them out and it come s out then you need a socket to remove the nut and a puller to take the wheel off. Once you are to that point it is very complicated.
from hear on out. it took over 4hrs to remove mine down to the titlwheel section.
there is a spring behind the metal plate that you see and you have to press down
on that metal plate to get the c clip off with a special tool that you have to get
it presses down on that plate to release the spring , which take pressure of to get
at the c clip there are lots of srews and small parts inside be careful not to lose them!!!!

Posted on Jun 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a turn signal switch on a 1989 Full Size Bronco, not a tilt wheel.


You will need to remove the steering wheel...using a steering wheel puller, or a harmonic balancer puller...the turn signal switch is under the steering wheel...unscrew hold downs, trace wire from turn signal switch to under the dash behind the brake pedal, disconnect the connector wire...re-install pulling wire up from floor to inside the steering wheel...sometimes tying the wire to another object, then pull through...hope this helps.

Oct 11, 2013 | 1989 Ford Bronco

1 Answer

Replace wheel bearing


which wheel bearing front rear on the front with front wheel drive you will need to remove the steering knuckle and then press the bearing out with a shop press then press hub back in to bearing on the rear it is most likely a bolt in easy

May 28, 2013 | 1989 Cadillac Sedan DeVille

1 Answer

How do i change the ignition in my 1989 thunder bird? do I need to remove the steering wheel?


Yes the steering wheel comes off.
If you check YouTube you should find a video for a Ford product close to your model.

Aug 26, 2012 | 1989 Ford Thunderbird

1 Answer

Replace steering wheel of toyota corolla 1990 model


The steering shaft has splines that allow the steering wheel to be positioned correctly with the front wheels.
Try tapping behind the streering wheel with a hammer to loosen so you can pull the steering wheel off.
If this does not work then you need a wheel puller to pull the steering wheel off the steering shaft.

Jun 10, 2012 | 1990 Toyota Corolla

1 Answer

Remove steeringing wheel in cadillac 1988 sedan deville ?


The steering wheel should be turned so the wheels are turned straight ahead before you start
the work. And the wheel should be locked so you can align the wheel correctly when
re-installing.

1) Take off the two 8mm on back of steering wheel that hold on the horn pad. Twist and detach the
connector/wire that goes to the horn. Remove the horn pad.

2) Remove the nut and retainer holding on the wheel.

3) Use a steering wheel puller to remove the wheel. You can get a loaner steering wheel puller from
autozone.

So why are you removing the steering wheel? Let me guess, the wheel is loose?!

Jul 26, 2011 | 1988 Cadillac Sedan DeVille

1 Answer

Tilt steering wheel loose 1989 chev truck


Not a fun job sorry!
1) Remove horn button. 2) Remove steering wheel. 3) Remove turn signal/cruise lever and cancel cam. 4) Remove tilt pins with a pin puller(about $10) 5) Tighten the four loose screws that hold tilt mechanism to the column.
Be happy you do not have airbags.

Mar 08, 2011 | 1989 Chevrolet K1500

1 Answer

1989 cadillac wheel tool for removing center cover


if you do not have the wrench the dealer may be able to replace it if they are factory rims. If they are aftermarket Snap On makes a universal set but they are pricy

Nov 26, 2009 | 1989 Cadillac Sedan DeVille

1 Answer

Wiper controls


Sorry but the 1989 deville wiper switch is controlled by the turn signal lever on the left of the column.

May 16, 2009 | 1989 Cadillac Sedan DeVille

2 Answers

1989 cutlass oldsmobile with tilt steering wheel ?


remove column trim, insert ket turn to on position, and push the pin in at the underside of the steering column pull straight out please rate -jeff

Jul 29, 2008 | 1989 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

63580 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...