Question about Mercedes-Benz CL65

Open Question

I installed Das 03/2009 on my Laptop Dell 510m. When I connect laptop to multiplexer I get an Error Fault (1.1) - 1.501.9302. How to solve this pls help me.

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Das any one no how to get auto computer to think it still connrted to it as i cant get manual wiring loom for vt commodore 1998

you should checkout this website that has books on all vehicles, name it they have it.

it covers wiring diagrams, electrical diagrams, fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, owner's/service/repair/parts/maintenance manuals etc everything totally..
I have ford expedition and I keep servicing and when needed repair it on my own. worth it !!!

Mar 15, 2018 | Cars & Trucks

1 Answer

How do I get error codes for porche 2010

You can use a professional Porsche diagnostic tool, so relatively safe, I can give you recommend a tool, it is allscanner vcx porsche piwis tester ii(, it can read / clear error codes, capture data streams, computer programming matching, component test, maintenance information consultation, site map elements, wiring diagrams, equipped with Lenovo or Dell laptop and genuine software testing that can help you diagnose and programming for all new and old kind of Porsche cars. There also appeared before my car some problems with this tool is, now it alive, really great!of course, if you believe that you can solve the problem yourself, or consult a professional mechanic,hope it is helpful to you....

Jul 22, 2014 | 2010 Porsche Cayman S

1 Answer

Engine fault indicator light

Automatic car?May be the chips shift control error transmission, use GNA 600 car diagnostic toool to check It wiil produce an error code, and then find the regular repair shop.In the maintenance can be eliminated with a laptop connection.

Dec 09, 2013 | Ford Explorer Cars & Trucks

2 Answers

On gear what E and S for

I can't say for certain that your fault, in knowed case, which turned out to be an electronic module (Part No. A 170 820 17 26, don't know what it is called but it costs a bomb) that decides whether the key you put in the ignition is the correct one for the car. You know that you are using the right key, but the faulty module has decided that you are trying to steal the car so it refuses to allow you to start it. A new module, programmed to your chassis, has to be obtained from the factory in Germany via your friendly local Mercedes dealer, to whom you have to prove ownership and identity.

That part is called DAS control unit. It sits under the dash, slightly to the right of the steering column. The "Start error" display can happen if there is a fault with the key, DAS unit or the chrome ring that sits around the ignition barrel. Obviously try the spare key first.

Try disconnecting the vehicles battery for 30 minutes (make sure you have your radio code, otherwise it won't work!) then re-attach it and try to start your car. It should wipe out the fault in your computer. After that, try taking the car into an independent MB shop and have them re-set any fault codes in your computer. This should fix your problem.

If not, take it into the MB dealer and raise a big fuss. They know this issue exists and the consumer should not be stuck with the repair bill! It is a problem that should have been taken care of with a recall.

Good luck.

Mar 21, 2011 | Mercedes-Benz 190-Class Cars & Trucks

1 Answer

Power locks don't work with remote or control from

The door lock/unlock input from the driver's key switch goes to the Door Multiplex control unit (main switch), the Door multiplex control unit then sends a signal on the BUS (CAN) circuit to the passenger's multiplex control unit; the passenger's multiplex control unit then controls all the door locks. The passenger's door lock key switch inputs to the passenger's multiplex control unit, if the locks work from the passenger's side key switch but not the driver's side key switch, the most likely cause is the driver's multiplex control unit (main switch) not sending the signal to the passenger's side multiplex control unit. This could also be the drivers side door lock actuator. Hope this helps!

Jan 07, 2010 | 2003 Honda Pilot

1 Answer

Mazda 3 - 2005 sedan When driving the das

faulty or loose electrical connection.

Sep 28, 2009 | 2004 Mazda 3

1 Answer

The problem with your Honda...

wow thats cheap compared to a renault

Sep 16, 2008 | 2001 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

81285 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides