Question about 2002 Lotus Elise

1 Answer

Lotus elise i left the keys in the ignition and the doors have locked, how can i open the doors? i have no spare key. please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Call to burglar, to unlock your doors.

Posted on Jun 22, 2008


1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only have 1 key for the ignition,doors are locked and won't open. Please help!


Car key won't work on one door?

forum.mrmoneymustache.com/ask-a.../car-key-won't-work-on-one-door...

Nov 25, 2014 - 6 posts - ‎5 authors
My car key goes into the lock on my driver's side door, but won't turn at all. It works fine in the trunk and passenger side, but all of a sudden, the driver's door won't open.... $100 for just a new lock cylinder from the auto parts store) and that ... It meant I had to have two keys, 1 for the doors, 1 for the ignition.

Lost my master key, have spare but won't open doors. ' Tacoma World

www.tacomaworld.com > ... > 2nd Gen. Tacomas (2005-2015)
You have the "valet" key that won't open your doors. ... and 1 keyfob. a friend game me another keyfob and i programmed it. but i only have 1 key. ..... There is no wear on the lock on the doors but you will see wear on the key and the ignition.

How to open a VW door that won't open from inside OR ...

? 4:25
https://www.youtube.com/watch?v=Fy3KbKkAZZ0
Nov 26, 2014 - Uploaded by BMAC VAGS

Dec 20, 2015 | Cars & Trucks

2 Answers

My spare key for 2010 cadillac cts isnt turning ignition


it may not be a spare key !
some cars have a set of keys
one that unlocks the door but does not start the car
one that may unlock the boot but not the car door

You may have a similar extra key !

another one the does every lock

Dec 06, 2015 | Cadillac Cars & Trucks

1 Answer

Coding spare key for a Toyota Echo?


Adding key.
Note:
You must be having one working master key to perform this function.
1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.
2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.
3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.
4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into ignition and leave it in ignition.
D. Close the drivers door.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.

Jan 09, 2013 | 2001 Toyota Echo

1 Answer

Disable alarm without remote on hyundai 2003 XG350L


You must have a spare key. When your alarm is going off have your key in the ignition, wait it out. When your alarm stops in approximately 30 seconds keep the key in the ignition exit the vehicle and lock the doors (don't forget your spare key). Go to the passenger door with the spare key and unlock the doors and turn the key that you left in the ignition and it should start right up. Just worked for me.

Apr 01, 2012 | Hyundai Motor 2003 XG350

1 Answer

Key no longer works in ignition. I stopped to gas up and the key I normally use would not open the gas cap door. I re-entered the car and the key would not turn the ignition. The key unlocks the steering...


take it to a lock smith to remove the broken part or you could jam the broken part down to where the ignition will turn with the broken key. I advise taking it to a lock smith to remove the broken part

Feb 02, 2010 | 2001 Toyota Tundra

1 Answer

Spare master key for 2006 Audi A-6 will open the door but not sta


In some cases, the spare is just a key to get you in the vehicle in case you lock yourself out. The newer model vehicles have a "Chip" in the key and it is "Seen" by the lock. This helps to prevent theft. If you have a key made, you have to go to a dealer to get the info on how to program the new key to get it to start.

Good Luck and hope this helps.

Mar 15, 2009 | 2006 Audi A6

1 Answer

Lotus elise 2005 fob and key does not work


Re-synchronize the FOB if the problem is with just one key.

1. Hold down both buttons simultaneously until the fob LED goes out. (10 seconds)

2. Release both buttons -- the LED should come on and stay on.

3. Press the larger fob button for a second, and the LED should flash.

IF re-synchronization doesn't work, you may have to replace the fob. Call customer service with your PIN (on the key-card that came with the keys). IF you don't have the PIN, then you need to call customeor service to confirm/register your ownership of the car.

If the keys are re-synchronized and it still doesn't work:

Re-program.

1. Re-synchronize as above, if you have not done so.

2. Turn the ignition on 3 times within 7 seconds. The red light above the odometer should light and stay on for 3 seconds.

3. Enter the PIN. Immediately after the red light goes out as per 2 above, switch on the ignition and count the number of flashes until it equals the number of the first digit on your PIN, then turn the ignition off, then on again. Do this for all four numbers.

4. What a pain, but if you get it wrong on a count, then you can restart by turning the ignition off for 10 seconds.

5. After the fourth digit, if the PIN is correct, the red light will stay on. Then you can re-test the fobs, and it should work.

Otherwise, call customer service.

Hope this helps.

Jan 02, 2009 | 2005 Lotus Elise

2 Answers

How to start it


press the large button on the key fob to imobilise the alarm system then try the start button

Jun 27, 2008 | 2005 Lotus Elise

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lotus Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

bilcast

Level 1 Expert

34 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Lotus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...