Question about 1994 Ford F250 Supercab

1 Answer

1994 fod f 250 has hard time with a smooth sift at

1994 fod f 250 has hard time with a smooth sift at times

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

Check the vacuum modulator on the transmission if it has one. If you pull the vacuum hose off and see any fluid, change it. Make sure you are getting vacuum from the hose. Change the fluid and filter and add 2 bottles of Lucas "Stop Slip." It could help and it can't hurt.

Posted on Nov 04, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Transmission wont go into 2nd gear now stuck in park

I would guess your having a problem with your shift cable, it is a $30 part, and the transmission shop will want $200 to replace it. I recently had a problem with mine, did it myself. It was a hassle the first time.
The cable loses lubricant, and or develops a kink, then it wont push the transmission lever.

Apr 18, 2014 | Ford Econoline Cars & Trucks

1 Answer

When i try to put it in park it takes it at times. i have to start it on neutral at times. it feels to smooth when i try to sift the gear.

Two possible causes could be a bad neutral safety switch (enables the vehicle to start in only Park or Neutral) or the transmission linkage may need adjusting. If you feel significant "play" in the gear shift (from what you described, it appears to have a lot of play) the linkage will need to be adjusted to get the gear shift to "lock in" to the individual gears instead of sliding.

Jun 01, 2011 | 2000 Ford Explorer

1 Answer

93 F250 7.3 DISEL banks turbo auto transmission sifts very late and very hard

change the tranny fluid, looking for metal shavings. have a pro do this, it is not s do-it-yourself project. sometimes, you can squeeze a few months or years more out of a bad tranny by changing the fluid. an old used car salesman trick used to be to put wood shavings in the tranny fluid, to smooth out the shifting, long enough to sell the vehicle.

Mar 26, 2011 | 1993 Ford F250

1 Answer

94 chevy suburban with 5.7. New dist cap, rotor, plugs, wires, fuel filter, battery, and last year new ign coil, module, and ecm. I set the timing to 0 at tdc with timing advance unplugged and when I...

sounds like timing is a little late. try a SLIGHT advancement (1-2 degrees) of the timing. keep trying until idle smooths out, listen for pinging on a steep hill in top gear. if engine pings at all other than at full throttle, timing is too far advanced. hope this helps. good luck.

Nov 08, 2010 | 1994 Chevrolet S-10

1 Answer

1994 fod f 250 as a hard shift somtimes

Check the vacuum modulator for fluid in the vacuum line. Change the transmission filter and add 2 bottles of Lucas Stop Slip.

Nov 04, 2010 | 1994 Ford F250 Supercab

1 Answer

My gmc serria shifts into first and second very hard, rest are smooth and harddly noticable

Sounds like the clutch is starting to go out, my Sierra did the same thing between 3rd and 4th. Time to get the tranny overhauled or replaced.

Dec 23, 2009 | 1994 GMC Sierra

2 Answers

1994 Ford Ranger won't get beyond 35mph, even if I floor it.

need to check timing belt it might of jumped a couple notches

Oct 08, 2009 | 1994 Ford Ranger Supercab

1 Answer

My new 94 mazda 626 2.0 is very hard starting

tap on the gas a couple of times then try to start it.

Apr 28, 2009 | 1994 Mazda 626

1 Answer

1994dodge intrepid will not sift into drive geer

check your eatx relay in the power distribution center

Jan 09, 2009 | 1994 Dodge Intrepid

Not finding what you are looking for?
1994 Ford F250 Supercab Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

83810 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides