Bleeding the brakes on your grand am is not that difficult and can be done on about 20 minutes. Here is a detailed pictorial of exactly how to bleed your brakes.
Fill the master cylinder with brake fluid..you would start from thevalve farest from the master cylinder first. Have someone pump up the brakes and hold the brakes to the floor while u loosen the bleedrer valve on the wheel. the brake pedal will slower go to the floor while pressure is being applied. tighten the valve then have your helper pump the brakes again till they get hard and hold them while you looseen the bleeder valve on the wheel again. Do this a couple of times in each wheel until the fluid runs steady out the bleeder valve, Then proceed to the next one.Good Luck!!!
1,015 views
Usually answered in minutes!
×