Question about 2006 Hyundai Sonata
Its a led light and it costs about 100 euros or something on the last one i done
Posted on Nov 03, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if there are 2 screws holding it on, remove them. if no screws, it's just snapped in. use small screwdriver to pry it off.
Posted on Dec 17, 2008
THREW THE TRUNK RIGHT UNDER WHERE THE LIGHT IS MOUNTED THERE SHOULD BE 2 WIRES GRAB AND TURN THE PLUG AT THE END OF THE WIRE THE PLUG WITH THE BULB SHOULD POP OUT
Posted on Mar 30, 2009
I just had to do this, and it isn't all that easy or quick. First, gently work the gray, carpet like cover loose from the area around the tail light ,(this may give you a little trouble). Once you have done this, you will see three silver nuts. These must be unscrewed. The lower left nut must be accessed through a hole next to where the trunk lid fits. (The screws are permanently attached to the lens housing so will not drop into obscurity when the nuts are removed). After removing the nuts, GENTLY work the lens housing away from the car. You may need a screw driver to unseat the housing, but just be gentle.
You will find three bulbs inside the lens. The brake light bulb is on the lower right side. Simply pull the old bulb out and insert the new one.
Just reverse these directions to reassemble the housing.
Posted on Jun 03, 2009
I experienced the same problem! After removal of the two screws, apply pushing pressure from the inside out with one hand on the outside of the lens for stability. The lens should push straight out.. There are 2 straight pins that are inserted into a plastic retainer that holds the assembly in place. Good luck
Posted on Jul 29, 2009
This is a simple step just to check. But I have a 1993 Eldorado and had the same problem. No turn signals, middle brake light works but others doesn't left or right rear. Turns out the emergency flasher switch was pushed in. The emergency flashers were not working with said switch pushed in, (on) and still doesn't. (probably a flasher unit out)
I pulled out the knob on the lower right of the steering column to turn off the emergency flashers, and voila!
Brake lights and turn signals all working great now.
Posted on Aug 02, 2009
Tips for a great answer:
Apr 02, 2014 | 1992 Toyota Camry V6
Jun 25, 2011 | 2003 Mitsubishi Lancer
Oct 27, 2017 | 2005 Jeep Grand Cherokee
Mar 19, 2010 | 1993 Cadillac Eldorado
Nov 14, 2009 | 1993 Honda Accord
Oct 05, 2009 | 1994 Pontiac Grand Am
Sep 24, 2009 | 2002 Toyota Camry
Sep 09, 2009 | 2002 Hyundai Accent
Jul 03, 2009 | 2000 Saturn SL
Mar 30, 2009 | 1996 Lexus LS 400
42 people viewed this question
Usually answered in minutes!