Question about 1987 Ford F 150

1 Answer

Clutch pedal not returning to position

I have brand new clutch new cross bar bushings.when i push clutch pedal to floor truck goes in gear but ,pedal does not return to position.when i pull on pedal with back of my foot it comes to position with some effort but eventually won't go into gear.

Posted by on

  • Anonymous Mar 15, 2014

    the rubber behind the clutch pedal broke off and now I am having a hard time shifting gears. How do I fix this?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Under the dash look to see if there is a spring attached to the petal or maybe under the hood. Or you might have something getting in the was of the petal arm. Good Luck and PEACE

Posted on Jun 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haveing problems with getting in gear,had new clutch,and fly wheel


You didn't say how long ago the clutch and flywheel was fitted.

If it was recent the car should be returned to the repair shop for some free-of-charge rectication.

If the clutch is cable operated it might need adjusting or if the adjustment is automatic, perhaps it is broken.
If the clutch is hyraulically operated perhaps all the air wasn't bled from it leaving it with a spongy pedal feel and insufficient travel.

Perhaps there is too many carpets under the clutch pedal. It is not unusual to have to press the pedal right to the floor with a brand new clutch.

If the gear lever selects all the gears easily with the engine off, but not when the engine is started, the problem is likely to be the clutch.
If the pedal feel is normal and there is maximum travel being delivered to the visible clutch mechanism the problem is likely to be inside, requiring the removal of the transmission.

Apr 29, 2016 | Cars & Trucks

1 Answer

Clutch wont return


Does the clutch pedal not return?

Oct 07, 2013 | Cars & Trucks

1 Answer

Int 806 will not move clutch is new


Fit 4th gear Release hand brakes on strait floor with open hood and push the car back and Forward to see if the engine engage your gear box if is not your clutch is back to front.if engage press the clutch pedal to make release of the gear,notes mechanical clutch cable or hydraulic system. check Release bearing arm position.

Sep 29, 2012 | Peugeot 806 Cars & Trucks

1 Answer

While driving on the road upon changing gears the clutch pedal sticks to the floor


try greasing or replacing the fulcrum of the pedal shaft. this may have got corroded inside which makes it difficult for the pedal shaft to return to its original position by the action of the return spring.

Jun 29, 2011 | Toyota Prius Cars & Trucks

1 Answer

I just got a new used 1995 honda accord and already i'm really unhappy. The gears stick terribly and the breaks... you have to push down really hard and they don't break fast. What can i do about the gears...


the gears are sticking? is the shifter just really tight and hard to move from one gear to the next, or even just wiggle around in neutral? if so, you may need new bushings for it. which are not very expensive. IF the shifter wiggles around easily in neutral, but hangs in a gear when you press the clutch in all the way, you could need a clutch, OR hopefully you can just try bleeding the clutch line. at the master cylinder on the transmission. the breaks.... do you have to push the pedal down really hard, or really soft and far? if you're putting a lot of pressure on the pedal but you don't have to push the brake pedal all the way to the floor, that would indicate to me that your pads and rotors are glazed over. you should replace the rotors, pads and have the calipers checked, and have the brakes bled. if you've got to push the pedal all the way to the floor, there's a good chance all you'll need is to have the brakes bled.

Feb 07, 2010 | 1995 Honda Accord

1 Answer

No pressure clutch pedal goes straight to the floor 1988 holden r


If hydraulic actuated mechanism, loss of fluid, defective master cylinder or slave cylinder at the clutch. Missing pin or other part between slave cylinder and clutch arm. Loose or broken slave cylinder mounting. Missing pin or broken part between pedal and master cylinder. If mechanical linkage, look for broken components or missing pins at moving joints. If you tried to shift into gear with engine running, you may have damaged the transmission gears.

Aug 11, 2009 | 1993 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...