Question about 1994 Chrysler LeBaron

1 Answer

Timing belt need to know how to set the timing on a 1994 lebaron had the heads worked now need help to go any futher.

Posted by on

  • cooksully Nov 07, 2008

    we put a new waterpump in and dont know how to set the timing marks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 126 Answers

Set the timing marks on the crankshaft and the cam marks head to head the marks should be with the cylinder number 1 an tdc top dead center on the compression stroke then adjust the cam so the marks are aligned remember the number 1 piston has to be @ tdc and the crank and cam marks are lined up ok bye for now good luck with it

Posted on Jul 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set timing on 1994 chrysler labaron 3.0


the valve springs are pushing against the cam lobes and turning the cam, you have to hold them with special tools or wrenches, usually the will stay in time if you hold them lined up with the marks and release gently on wrench, don't breath or they will jump

25005933-iv5yhqpktypbvunjtpsp2olz-4-0.gif

Aug 25, 2014 | 1994 Chrysler LeBaron

1 Answer

Changed head gaskets and now need to know how set timming on distributer and timing marks


Copy and paste the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

http:/www.2carpros.com/car repair infomation/year/1994/make/chrysler/lebaron/1994 chrysler lebaror

Jan 27, 2011 | 1994 Chrysler LeBaron

1 Answer

Diagram for timing marks 94 lebaron 3.0litre


Click on the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/chrysler/model/lebaron/1994_chrysler_lebaron_timing_belt_diagram_marks.htm

Apr 05, 2010 | 1994 Chrysler LeBaron

2 Answers

Serpentine belt not staying on.


the only water deflection dodge gave these cars was directly under the pully system if it has this and is still throwing belts check the tensioner

Dec 14, 2009 | 1994 Chrysler LeBaron

1 Answer

My serpentine belt came off my 93 chrysler lebaron how do I get it back on?


Look at the diagram specific for your engine size and just follow it and it will go smoothly. Make sure you have someone help you though it can be tough by yourself. You will need a set of combination wrenches and maybe a breaker bar for some extra help.

Dec 08, 2009 | 1994 Chrysler LeBaron

1 Answer

I need to replace my serpentine belt but i dont know the pulley route


1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Belt Routing Diagram (Alt., P.S., Idler & Tens.)

ec675ed.jpg

From DAYCO Catalog

I hope help you with this. Good luck.

Oct 14, 2009 | 1994 Chrysler LeBaron

2 Answers

Do you have a diagram on how to install a serpentine belt on a 1994 Chrysler LeBaron?


1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Open the hood, the diagram for the serpentine belt is on the cowling.

From DAYCO Catalog
Belt Routing Diagram (Alt., P.S., Idler & Tens.)
9e1b1eb.jpg


From comments to other users and Lebaron Owners; for remove, starting at the alternator pulley and going clockwise around the pathof the belt, the belt drops down and forward and goes under the idlerpulley, continues forward and less steeply downward and goes around thecrankshaft pulley clockwise, rises rearward going over the top or thetensioner pulley counterclockwise, then drops down and around the powersteering pump clockwise and rises to go around the alternator pulleyclockise (which is where I started the description). To loosen thetension to remove the belt, or to give you slack to install the beltwithout having to force it over a pulley while under tension you rotatethe tensioner pulley arm around its pivot clockwise according to the'94 shop manual. It doesn't show by what means to effect this rotation,but in the earlier manual I have ('89) it shows there to be a 1/2"square hole in the tensioner arm into which you insert a breaker barwith a 1/2" square drive which gives you the temporary lever to rotatethe tensioner against its spring action. I assume there is a similar1/2" square hole on the '94 you are working with. Interestingly,between '89 and '94 the idler pulley was added, and the requiredrotation of the tension arm changed from counterclockwise to clockwiseto relieve the tension."

I think this will help you get the belt on. Good luck.

Oct 13, 2009 | 1994 Chrysler LeBaron

2 Answers

Belt diagram


Without knowing what engine you have its hard to say, but included diagrams for all the engines...pick your set up and there ya go..




c40e199.gifb4f1ed4.gif7ed5637.gif0f19c9f.gif

Jul 08, 2008 | 1994 Chrysler LeBaron

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...