Question about 1994 Oldsmobile Cutlass Supreme
How do I get the code or reset it if I don't have it and the previous does not either?
Please be more specific as to whether it is a factory or aftermarket unit. Either way, please provide make and model, Not a biggie, I answer this question a lot.
Posted on Jun 13, 2008
Tips for a great answer:
The ignition switch
The Passlock?"¢ sensor
The security indicator
Jun 24, 2016 | 2006 Pontiac Torrent
The ignition lock cylinder case, including the Passlock?"¢ sensor
The ignition switch
The body control module (BCM)
The security indicator on the instrument cluster
The powertrain control module (PCM)
Body Control Module (BCM)
The body control module (BCM) contains the logic of the Theft Deterrent System. The BCM provides the battery positive voltage to operate the Pass lock" sensor. The BCM also measures the voltage of the security sensor signal circuit. The voltage measured will indicate whether the Pass lock sensor has been activated and whether the resistance value from the sensor is a valid value or the tamper value. If voltage measured is in the valid range, the BCM compares this voltage, voltage code, to a previously learned voltage code. If the voltage codes match, the BCM sends a class 2 message containing a password to the powertrain control module (PCM). If the voltage codes do not match, or the voltage is in the tamper range, or there is a circuit fault, the BCM will not send the correct password to the PCM, and the vehicle will not start.
there is nothing you can do , if your vehicle won't start you need to take it to the dealer or a ASE certified repair shop. Messing with the anti-theft system may render your vehicle useless .
Mar 03, 2016 | Cars & Trucks
Feb 18, 2016 | Cars & Trucks
Jul 18, 2015 | Chevrolet Chevy Cars & Trucks
Instrument Cluster and Powertrain control module (PCM)
If the theft light is on there is a problem and a code set. You can try to do reset . Turn the key on , don't try an start the car . Let key on for 10 min. till the light goes out, if it goes out turn ignition off an wait a couple of min. then start the car
Dec 31, 2014 | 1996 Buick Skylark
Aug 05, 2014 | 1999 Ford Windstar
Jul 26, 2012 | Ford Cars & Trucks
Dec 21, 2011 | 2005 Ford Five Hundred
Mar 04, 2011 | Saturn Ion Cars & Trucks
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: