Question about 2001 Chrysler Sebring

1 Answer

Removing the 2.7 engine from 2001 sebring sedan?

Is there a step by step manual or instructions for removing the 2.7 V6 from a 2001 Chrysler sebring 4dr sedan? Thankyou

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Chrysler Master
  • 1,224 Answers

Ok heres the simple version its alot of work
remove hood put someplace safe
disconnect all wireing and mark off with masking tape and marker
****** you need car lift ******
remove all plastic part molding from engine
find the engine hoist holes for chain to hook to
this is a unibodi design so the whole front chassis drops down
unbolt the chassis make sure to have the chasis blocked and stable
lift car while chasis stays on floor engine tranny and every thing inside hood comes down on the unibody this is how you remove an engine from a sebring

or you take to the dealer spend the doe cause you got a nice car and have it done right

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt routing for 2001 Sebring 2.4 engine


Jeff, Check the attached links for your 2.4 belt routing,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Engine Mechanical Components Accessory Drive Belts 2...
How to Change Serpentine Belt on 2002 Chrysler Sebring
http://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2001-chrysler-sebring-4-cylinder-24-liter-engine-alternator-and-air-conditioner-with-dohc-engine-02236

Jul 31, 2016 | Cars & Trucks

1 Answer

Compatible? Automatic Manual 2002 Sebring/Stratus RT Sedan


Yes they can be used, but you must swap everything including the entire wiring harness.

Apr 01, 2016 | Cars & Trucks

1 Answer

WHAT ARE THE TORQUE SPECS FOR THE INTAKE MANIFOLD BOLTS ON A 2001 CHRYSLER SEBRING 3.0L ENGINE


Sorry first attempt got sent by accident

Upper intake manifold bolts/nuts 168 in-lbs

Lower intake manifold nuts are done in 4 steps

Step1. Front nuts 61 in-lbs
Step2. Rear nuts 185 in-lbs
Step3. Front nuts 185 in-lbs
Step4. Repeat Steps 2 and 3

Feb 20, 2011 | 2001 Chrysler Sebring

2 Answers

Tire specs for 2001 chrysler sebring


HI. Here is the complete line up of specs concerning your vehicles front and rear tires. You did not post the trim line of this car, so I posted all models and tire combination's specified by the manufacture.


2001 Chrysler Sebring Lim 2 Door Convertible Front and Rear Tires P205/60R16
2001 Chrysler Sebring LX 2 Door Convertible Front and Rear Tires P205/65R15
2001 Chrysler Sebring LX 2 Door Convertible Front and Rear Tires P205/60R16
2001 Chrysler Sebring LX 2 Door Coupe Front and Rear Tires P205/55R16
2001 Chrysler Sebring LX 4 Door Sedan Front and Rear Tires P205/65R15
2001 Chrysler Sebring LX 4 Door Sedan Front and Rear Tires P205/60R16
2001 Chrysler Sebring LXi 2 Door Convertible Front and Rear Tires P205/60R16
2001 Chrysler Sebring LXi 2 Door Coupe Front and Rear Tires P215/50R17
2001 Chrysler Sebring LXi 4 Door Sedan Front and Rear Tires P205/60R16

Jul 06, 2010 | 2001 Chrysler Sebring

2 Answers

When should the timing belt be replaced on a 2003 sebring LX? v6 engine?


Every 80,000 miles along with a NEW water Pump as well since its right there with it

Apr 14, 2010 | 2003 Chrysler Sebring

1 Answer

Trying to remove engine from 2001 sebring sedan 2.7 l does it come out from top or bottom


comes out through the bottom with the tranny att. if you cannot get the car high enough, take off the compleate front clip and slide it out the front, and yess lots of screws will snap and break. there is 2 or more hidden bolts on the cross member just be patient and have lots of kitty litter... lol

Dec 03, 2009 | 2001 Chrysler Sebring

2 Answers

Location of 2001 2.7L v6 chrysler sebring thermostat location


Follow the TOP hose on your radiator to where it connects on your engine block. The thermostat is under the metal piece mounted to the block which the hose is connected to. It typically has to bolts to remove and you will find the thermostat under it once you remove the mounting.

Oct 03, 2009 | 2001 Chrysler Sebring

1 Answer

Motor swap


Yes. It is the same engine for both cars.

Jun 16, 2008 | 2001 Chrysler Sebring

Not finding what you are looking for?
2001 Chrysler Sebring Logo

Related Topics:

829 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...