Question about 1995 Dodge Intrepid

1 Answer

Help how did i get the check engine code for my 1995 intrepid?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 458 Answers

Go buy a book on the car. The codes will be in the book. You can sometimes get the code by turning the key on and off and then watch the engine light blink. The blinks are numbers. 1 Blink means number one, 2 blinks mean number 2 then so on. There is a plug underneath your dash by the drivers seat. A parts store usually does this for free. In the US you can go to Autozone for this. When you do the key on and off trick you sometimes have to jump the plug in 2 spots. Without having the book on your car, I can not tell you exactly how it is done. You can try the key on and off trick.

If this solves your problem please rate it as a Fixya.

Posted on Jun 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is engine code 55 for a 1995 dodge intrepid?


Its just the end of the code cycle it starts with 12 and ends with 55. You will know when there are no more codes when you get a flash code of 55.

Nov 06, 2010 | 1995 Dodge Intrepid

1 Answer

I was told that I turn the key on and off 3 times and I would get codes. 1995 dodge intrepid. I don't see anything but all the lights, no codes. what am I doing wrong The problem is I can go for a while,...


turn the key off-on, off-on, off-on...ending in the on position. The on position is when the dash lights come on--not when the engine is cranking!.. the off position is one click back from the on position. If you have a digital odometer then the code will display there. If not then the codes will flash out in pairs of numbers via the check engine light. 5-5 is the end of the test

Sep 21, 2010 | 1995 Dodge Intrepid

1 Answer

My 1995 intrepid es tries to start, and sometimes it will, but only a few seconds. seems like if you let it sit a little while it will run a couple seconds then quit.


possibly the fuel pump. here's a hint for code reading on a intrepid older than a 96. put the key in the ignition and turn in on without starting the engine. in this order

ON
OFF
ON
OFF
ON

then leave it in the on position. the check engine light will start flashing a mourse code at you. count them. all codes should be read as double digits. so if it blinks three times then pauses and blinks another four the code is 34. and the code reading will end at 55. write down the numbers and look them up.

Aug 19, 2010 | 1995 Dodge Intrepid

1 Answer

How do i check diagnostic codes on a 1995 Dodge Intrepid ES 3.3L


if you call around to local auto parts store they may help you for free

Mar 21, 2010 | 1995 Dodge Intrepid

1 Answer

My 1995 dodge intrepid won't start. It is getting


check the map sensor and the fuel pressure at the engine

Jul 30, 2009 | 1995 Dodge Intrepid

1 Answer

1995 Dodge Intrepid ES 3.5 v6 cranks but won't start


is there any compression??? If the timing belt is broken, the valves will not be moving. It will be making a higher-pitch cranking sound if its the timing belt.

Feb 04, 2009 | 1995 Dodge Intrepid

1 Answer

Engine diagnostic codes


I don't have a dodge ram but the codes for the dodge vehicles where pretty much the same. For my intrepid the codes read for the following numbers

12 - Problem with battery connection (This usually happens if you disconnect the battery)
21 - Problem with the oxygen sensor circuit
52 - Oxygen Sensor signal input indicates rich mixture during engine operation.

It sounds like you may need to change an oxygen sensor. Hope this helps.

Aug 15, 2008 | 1995 Dodge Intrepid

1 Answer

Check engine codes 95 dodge intrepid


Code 12 is: Direct battery input to PCM was disconnected within the last 50 key-on cycles.

Code 21 is: Neither rich nor lean condition detected from the oxygen sensor input or oxygen sensor input voltage maintained above the normal operating range.

May 22, 2008 | 1995 Dodge Intrepid

Not finding what you are looking for?
1995 Dodge Intrepid Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...