Question about 2004 Volkswagen Jetta

1 Answer

2004 jetta ignition

Yes its adigital key it was determand by dealer to have defetive cylinder, so i orderd anew one speciel order because it had to match my digital key. now here is where i,m at i removed the2 screws at the bottom of steering wheel cover and this allowed me to remove top cover exposing turn signal and wiper controls. now where to from here i do,nt have a manuel so can you please help thank you 007russ

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 329 Answers

Torx T25 driver To remove steering column trim

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 jeep grand cherokee 2wd 4.0/6 will new keys with new ignition cylinder have to be programmed?


yes it will have to be reprogrammed by an authorized place or dealer just call around and get quotes to get them to compete.

Oct 24, 2012 | 2004 Jeep Grand Cherokee

1 Answer

Spare key for 2004 Isuzu Rodeo


The key will need to come from the dealer (you can find many Isuzu dealers whio sell part on line) but the remote can be bought on line from Here

Feb 06, 2012 | 2004 Isuzu Rodeo

2 Answers

I need to know if the alarm system on a 1997 vw jetta need to have a key pad. we think the system came with the car and is not aftermarket!


call a volkswagen dealer try unlocking the driver door with the original key or turning the ignition to on. goodluck

Mar 11, 2011 | 1997 Volkswagen Jetta

1 Answer

Ignition on my 2004 jeep grand Cherokee is locked, how do I unlock the ignition? Keys goes in ignition, door chim works when key is in ignition. But the key won't turn it's stuck.


tap the ignition lock cylinder with the plastic end of a scrwedriver (with the key removed). then insert the key and try to start. Try this several times. If you get it to turn immediately replace the igntion lock cylinder. The cylinder needs to be in the on position in order for the lock button to be depressed so that the cylinder can be removed from the housing.

If you still can't get it to turn than you will have to drill out the lock button in order to get the old lock cylinder out. I wouldn't recommend doing this unless you have some experience and understand what you are doing.

The lock button can be accessed by removing the lower steering column cover.

Nov 23, 2010 | 2004 Jeep Grand Cherokee

1 Answer

The key that goes to the Volkswagen doesn't seem to enter at sometime. Almost like something is jammed in the ignition. After about 10 minutes of trying to force it into the ignition, it works, if we're...


i would inquire at a dealer about whether or not the lock cylinder is covered under warranty. my first and last repair method is a bit of graphite on the key and in the lock cylinder, if that does not work then a new lock cylinder is in order. these inevitably have their last moment at night, in adverse weather, a million miles from home. at that time you will rue the decision to not spend a couple hundred to get it fixed correctly. an ounce of prevention

Nov 11, 2010 | 2005 Volkswagen Jetta

1 Answer

Can take key out and car keeps running


the ignition lock cylinder needs to be replaced. The BMW dealer will order you anew one ,coded for your car.

Apr 16, 2010 | 1996 BMW 318

1 Answer

I have a 2004 ford focus that has a chip in the ignition key. the key cylinder on the column is bad and needs to be replaced. it can be bought at local parts store but can i program it or does the dealer...


The new ignition key cylinder will only need programming if it comes assembled with a key. If the cylinder comes in a kit (type that ford dealer sells) that lets you build the cylinder to match your key, then no programming is needed.
I hope this helps you

Apr 10, 2010 | 2004 Ford Focus

2 Answers

Door lock cylinder...


You'll need a new ignition switch from the dealer. Removing it and replacing my rating of 6 - 10. This means unless you have a Bentleys repair manual you wouldn't know exactly where to place 3/64th drill bit in order to push the locking tab in the cylinder after all the trim is removed.

Sep 06, 2009 | 2000 Volkswagen Jetta TDI

4 Answers

Key will not go into ignition, drivers door lock stopped working


I had the problem with key not going into the ignition on 2005.5 Jetta had to have the car towed and ignition replaced which cost 375$. But what i read afterwards is there is a locking mechanism in the ignition it is a white thing that slides so you cant get your key in this can be moved with a a small aharp object ant you can then get your key in!!!

Mar 14, 2009 | 2006 Volkswagen Jetta

Not finding what you are looking for?
2004 Volkswagen Jetta Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...