Question about 1993 Mazda MX-6

1 Answer

Mazda MX6 Mystere Ls V6 1993

I have taken two automotive classes in highschool. My supervisor gave me an offer, he said that if i could fix/replace the camshaft (that had broken off) in this car than he would give me the car. how do i go about it?

Posted by on

  • Samurai Sam Jun 15, 2008

    Thanx for the reply. actually i looked into it a little and it looks like a backyard machanic could do it quite easily. I was looking for more specifically what to do but i think i can handle it, it's just a matter of taking everything apart and then reassembling.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Go and buy yourself a workshop manual (Something like the Gregories manuals sold here in Aus) and for the 50 bucks it'll cost you, you'll have yourself a good cheap car. A good manual will show you step by step how the job is done and you can have it there with you as you go.

Posted on Jun 13, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Mazda 1993 MX6 2.5ltr v6 LS manual transmission. Discontinued Part/No Part #. The Distributor Connector (Pigtail).

Mazda do not make distributors or electrical connectors . These parts are made for mazda to mazda specifications by electrical manufacturers / contractors . So being aware of that it is possible (long process) to get the name on the distributor to Lucas-Nippon denso -nitto -Mitsubishi-( Mitsubishi make for a lot of different car makers as oem equipment) etc and any other details stamped into the body of the distributor or ignition module and contact them on the web site at the technical section or parts section and try and track down from there. Another way that I sometimes use is to cruise the wreckers (mazda in this case ) and look for distributors from other engines that will have this part in use as there is always a parts over lap where new products are fitted to the run out models before the new model is on the market

Mar 15, 2014 | Mazda Cars & Trucks

1 Answer

I have a 93 Mazda mx6 Ls... Everytime I step hard

When my MX6 was doing this it turned out to be an hydraulic leak from the clutch master cylinder, which runs on the same fluid reservoir as the brakes. Clutch master cylinder replaced and all good again!

Apr 10, 2012 | 1993 Mazda MX-6

2 Answers

How do i replace the clutch on a mazda mx6 2.5 v6 94

not a job for a weekend mechanic without the right gear ,best advice is ask for prices with local garages or find a local mechanic who works in one of these garages whos married with kids and cash strapped and offer him a few shekels to come around at the weekend to help you do it .Now how can you tell iam a good east end london boy my life already ...sorry couldnt resist the british humour that you will no doubt not understand try downloading carry on up the kyber from a torrent site and watch it ,true british humour

Jul 21, 2010 | 1994 Mazda MX-6

1 Answer

How hard is replacing the catalytic converter on a 1993 Mazda MX6 LS?

depends if the bolts are seized ,just cut them off if they are ,hardest part is jacking vehicle up

Apr 08, 2010 | 1993 Mazda MX-6

1 Answer

1996 mx6 wont start

You have a bad ignition switch perhaps , Do you have a big heavy key chain by chance BC that will will wear them out.

Dec 07, 2009 | 1996 Mazda MX-6

2 Answers


well try taking out the dash and see if it connected to the dash maybe it got pulled off when the tranny was out?

Feb 03, 2009 | 1993 Mazda MX-6

1 Answer

Mazda mx6

did you try replacing the ignition module?
every time that happened to me, it was exactly that. I have found an inexpensive way of repairing this.

Jul 27, 2008 | 1993 Mazda MX-6

Not finding what you are looking for?
1993 Mazda MX-6 Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8729 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides