Question about 1997 Mitsubishi Mirage

2 Answers

ENGINE Problem i have mitsubishi mirage and i start to notice check engine lamb i already cleaned all sensors with cleaner but it comes light again so i need to know what's it mining and how to fix it thanks.

Posted by on

  • c21bro Nov 12, 2008

    I have a 1997 Mitsubishi Mirage with about 97k miles-the check engine light has been on for quite a while - what should I check and is there a servicing requirement about this mileage. The car runs pretty well with no obvious problems


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 1999 Mirage 1.5 - with 225thou miles on it - my light stay's on too- I was told it was an O2 senser- but I noticed that the spark plugs come loose alot. When I tighten them and have my light reset it stays off till I need to adjsut them again-?

Posted on May 22, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Diagrama mirage 97

Posted on Aug 16, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Pejero engine turns over but wont fire check engine warning lamb stays on

For check engine light on,its definitely error code stored in the cars computer.,Getting the error code scanned by OBD 1 scan too, is advisable.
Also for car not starting issue,click the link below :----
For check engine light coming on,click the links below :---



This will help.


Jan 27, 2012 | 1992 Mitsubishi Pajero

1 Answer

I have 2000 mitsubishi mirage. Code P0170 FUEL TRIM MULFUNTION (BANK 1). What does that mean?


That code typically comes on due to an air leak, clogged fuel injectors, clogged fuel filter, or even a bad mass air sensor. I have answered other questions from people with similar problems, and some have had luck simply using a fuel injector cleaner with a full tank of premium gasoline. I've had good luck with STP Complete Fuel System Cleaner, available at most auto parts stores. I would also recommend you replace your air filter.

If your light had turned off, there really isn't much any mechanic can do, though you can ask for them to check for any air leaks in your intake system. But if your light comes on again and stays on, the problem probably is with your mass air sensor, and would probably need to be replaced.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 11, 2011 | 1997 Mitsubishi Mirage

2 Answers

Mitsubishi Mirage 94 at idle fails

Youll have to take it to someone whon has an OBD, not OBD2 hook up.

Feb 03, 2010 | 1994 Mitsubishi Mirage

1 Answer

How to install egr valve on 2000 mitsubishi mirage 1.5

  1. Disconnect the negative battery cable.
  2. Remove the air cleaner and intake hoses as required.
  3. If necessary, detach the EGR temperature sensor connector.
  4. Tag and disconnect the vacuum hose from the EGR valve.
  5. Remove the mounting bolts and the EGR valve from the engine.
  6. Clean the mating surfaces on the valve and the engine. Make sure to remove all gasket material.
  7. Inspect the valve for a sticking plunger, caused by excess carbon deposits. If such a condition exists, clean with appropriate solvent so valve seats correctly.
To install:
  1. Install EGR valve with a new gasket in place.
  2. Install the mounting bolts and tighten as follows:
  3. 1.5L, 1.6L, and 1.8L engines—7–10 ft. lbs. (10—15 Nm)
  4. 2.0L engines—10–15 ft. lbs. (15—22 Nm)
  5. 2.4L and 3.5L engines—16 ft. lbs. (22 Nm)
  6. 3.0L engines—8 ft. lbs. (11 Nm)
  7. Connect the vacuum hose to the EGR valve.
  8. If detached, attach the EGR temperature sensor.
  9. Install the air cleaner and air intake hoses as required.
  10. Connect the negative battery cable.
The EGR valve is retained to the intake manifold with two bolts.

Dec 07, 2009 | 2000 Mitsubishi Mirage

2 Answers

MAP sensor output voltage too low?

poor start, very poor gas millage

Jul 31, 2009 | 1993 Mitsubishi Mirage

1 Answer

My 2000 mitsubishi mirage check engine lights on and it choking when im in idle wants to konk out but doesnt

Spray some carb cleaner ta the fuel intake to see if it improves, if yes then add some carb cleaner fluid in the fuel line to clear the nozzles..sodeep

Jun 26, 2009 | 1999 Mitsubishi Mirage

1 Answer

2001 Mirage Check Engine Light

Yes, the O2 sensor would be the proper place to start. You really dont need to replace it rather than just clean it with a wire brush. It is easier to replace it though.

Jun 23, 2009 | 2001 Mitsubishi Mirage

Not finding what you are looking for?
1997 Mitsubishi Mirage Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides