Question about 2005 Mazda RX-8

1 Answer

Mag Rims Hi, i would like to know if a set of 20" mag rims will fit on my Mazda RX-8 (2005)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

The answer is no. You could try with tire dimension 30, but I highly discourage you to do so.

Adding 20" rims will significantly reduce the driving quality of your car. Stick to the original 18" rims and you will be fine. Do not put the looks above the driving quality of your RX-8, because the driving quality is what your RX-8 is all about.

Here are some reasons not to do it:

1. Your car will crawl... Acceleration is much worse.
2. It will immensely increase the wear of your shock absorbers.
3. It will give you real hard rides you will have neck and back problems.
4. Cornering will be really dangerous instead of fun.
5. The tires will be much more expensive.

Hope this helps.

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What wheel torque specs bmw m4


Aftermarket rims should come with torque spec. from manufacturer. Most generally, I torque mag rims, chrome, aluminum rims with tapered lugs to 100 FT. LBS. Never had a problem.

Jul 20, 2014 | 2015 BMW M4

1 Answer

I have a 2003 Mazda6i with 75,000 miles on it and i'm getting ready to have a brake job done new pads and rotors turned. Wanting to know what would be the best pads for my Vehicle. the pads I have now...


Yes the ceramic ones will make less of a mess on your rims, but won't provide the same stopping power. They will still work good just not as good the cheap brake pads make a mess because they are a soft compound witch breaks down under use and turns to black dust.

May 11, 2011 | 2003 Mazda Mazda6

1 Answer

Where can I buy mags for 2004 honda civic?


Just google them. However get the specs on your present
rims, diameter, width, lug hole placement, etc. Usually
the mag mfg. or provider will know what mag rims fit your
car when you order.

Jan 13, 2011 | 2004 Honda Accord

1 Answer

Will 20 inch rims with low profile rims fit on a 1994 es 300 and run good without ant problems.


As long as manufactures recommended height is maintained it shouldn't matter but if it's not than than this could affect your speedo and also make sure you have enough clearance for the turning movement.Alocal tyre or mags place should be able to calculate which size is recommended for you vehicle.


Was this helpful?

Sep 26, 2010 | 1994 Lexus Es 300

1 Answer

Hi. I have a mazda bongo. I want to know if I can fit 16'' rims from a mazda323FZxi on my bongo. The seller gives the following info about the rims. Aspect ratio-50. Offset-40. Stud diameter-114. Rim...


Hi! It may fit, but the question is.. does it have the same stud holes. THey may not much so please check if the studs will fit. Hope this helps and have a good one!

Jul 01, 2010 | 1991 Mazda 323

1 Answer

Will 94 940 mag rims fit a 88 240dl?


Yes, these rims will fit in. Series 200/700/900 inter changeable except for 960 model.

Oct 26, 2009 | 1988 Volvo 740

1 Answer

Fiat Spider wide rims


Check the clearance with your current tires. Turn your wheels as far as they will go and measure the gap between the rim and frame. Then measure the inside offset from your regular rims and subtract that from the inside offset on the mags.Compare that to the gap between your current rim and frame. If it is the same or bigger, the new rims will likely hit.
The best way to know for sure is to mount one rim and turn the wheel and see what happens. Hope this helps.

Aug 28, 2009 | 2007 Fiat 124

1 Answer

Mag wheels


No the tire can not be stretch to fit you have to buy the set of tires now to install on ur wheels

Jun 01, 2009 | 1998 Nissan Maxima

2 Answers

2009 mazda6 has no spare wheel


go to your local wrecker and get them to match some thing up as it doesn't have to come of a Mazda (most early Mazda only had 4 stud rims)

other option is to go to a Tyre retailer and get a cheep mag wheel and a cheep Tyre fitted if it is only a spare it dosn't have to look good

Apr 07, 2009 | 2009 Mazda MAZDA6

1 Answer

Steering problem


the size of the mags can be the problem .when the mags been used already the shape have change a little .

Jan 22, 2009 | 1999 Suzuki Vitara

Not finding what you are looking for?
2005 Mazda RX-8 Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...