How to replace front wheel bearing on a 1996 ford aerostar

Blower motor is in dashboard. Problem could be with motor windings, bearings, fuse, relay, and switch. Check them all out.

These video might ive you some idea:


How to Replace Front Wheel Bearing


Replace Front Wheel Bearing Hub Ford Taurus Mercury Sable


How To Install Replace Front Wheel Hub Bearing Taurus Sable 96 06 Part 1...


How To Install Front Wheel Bearing Hub Assembly 2002 05 Ford Explorer...

Hello, it sounds like you have a possible wheel bearing or brake problem. first support the van on jackstands and shake the front tires, if you feel alot of play in the wheel bearings they may need to be tightened up, this is done by using a torque wrench to set the bearing load, if you need to get the torque sequence it can be found in the repair manuals at auto parts stores. if you shake the wheels and it feels tight with no excessive play it may be a brake issue, you need to look at the backing plate to make sure it isnt rubbing on the rotor.

please fllow the link below to detailed instructions on this job.

http://www.trueblueford.com/wheelbearings.htm

Nort really, You have rack and pinion gear, Need to check tie rods, inner and outter, wheel bearings and any linkage in the front end first.

U REMOVE THE SHOES AND REPLACE THEM ONE WHEEL AT A TIME, THEN USE THE OTHER WHEEL AS A GUIDE TO PUT THEM BACK TOGETHER, REMEMBER THE LONGEST BRAKE SHOE GOES TO THE REAR.

You need to provide more info. Is it a front or rear bearing? That would be a good start.

i have no idea what you need torch specification but if it the wheel bearing or the hub on the one i had i just made sure everything was tight but also at the same time made sure the rotor move free and every thing was in place.

The wheel bearing assy is pressed into the hub---you need to remove the front hub assy and take it to a parts store that has a machine shop----or you go to a salvage yard and buy a used hub and install it--way easier...
Gary