- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
as simple as this is going to sound its been my exspirence with the cj's they loose ground back at the light housing. try taking off the light and ill bet there will be some rust there. use a small peice of 180 sand paper to scratch off the dibris and reatach and you sould see the lights return. hope this helps and let me know. thanks and good luck.
I think I found the problem, part of the high beam switch was burned, resulting in a loose connection. When I connected the loose wires, the lights worked. My guess is, the wire burned is the relay wire to go from low to high. I am going to replace the switch, hopefully this will solve the problem, I think it will.