Question about Chrysler LeBaron

1 Answer

Have no heat, replaced thermostat, still no heat. for a 1994 lebaron.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 8,841 Answers

Please see my tip at http://www.fixya.com/cars/r6235876-no_heat_fan_blowing_cold_air . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Nov 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Over Heating


Did you bleed the system and replace any lost coolant? Is the system also clean?

Air and other blockages in the line will cause that problem.

Jul 29, 2013 | 1994 Chrysler LeBaron

1 Answer

Changed head gaskets and now need to know how set timming on distributer and timing marks


Copy and paste the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

http:/www.2carpros.com/car repair infomation/year/1994/make/chrysler/lebaron/1994 chrysler lebaror

Jan 27, 2011 | 1994 Chrysler LeBaron

1 Answer

Diagram for timing marks 94 lebaron 3.0litre


Click on the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/chrysler/model/lebaron/1994_chrysler_lebaron_timing_belt_diagram_marks.htm

Apr 05, 2010 | 1994 Chrysler LeBaron

1 Answer

1994 chrysler lebaron 3.0 Ignition started


You have lost the accessory power feed due to high resistance at the ignition switch connector.
Most likely the switch will need to be replaced and if the harness plug is not heat damaged too bad you may be able to clean and crimped the terminals a little for better contact. In some cases you can buy just the connector end from the dealer as a repair part.

Dec 27, 2009 | 1994 Chrysler LeBaron

1 Answer

1994 Lebaron Convertible No Heat, High Temp Gauge


The heat is made in the engine so if the engine is overheated and nothing else is hot, the water is not moving.
I would have suspected a thermostat also.
I would guess now that you have a dead water pump.

Karl at topgunwon.com

Dec 21, 2009 | 1994 Chrysler LeBaron

1 Answer

I need to replace my serpentine belt but i dont know the pulley route


1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Belt Routing Diagram (Alt., P.S., Idler & Tens.)

ec675ed.jpg

From DAYCO Catalog

I hope help you with this. Good luck.

Oct 14, 2009 | 1994 Chrysler LeBaron

1 Answer

Replacing Starter on 1994 Lebaron


Replacing starters for most vehicles is pretty much a straight forward replacement. I would suggest that you purchase a chilton or Hayes book. They go for about $25, and they give detail and show pictures.

Jul 27, 2009 | 1994 Chrysler LeBaron

1 Answer

93 lebaron overheats slowly


sounds like it could be your radiator could be slightly plugged or rear dirty on the outside causing very little airflow over a period this will cause an overheat .do this car have an electric radiator fan ? and when motor os hot or even over heating the electric fan motor should be spinning until cooler if no repair that. are you loosing coolant ? after a long hot drive put your hand on the front side of the rad with the motor off and feel the center of the rad then put your hand on the corners see if there is a differance if there is the rad is plugged try to flush it or replace rad and thermostat ok

Jul 05, 2008 | 1994 Chrysler LeBaron

1 Answer

Over heating


Looking for the electric fan thermostat/switch on a 93 lebaron myself..

May 19, 2008 | 1986 Chrysler LeBaron

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

83772 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...